Weber 1481004 Owner's Manual page 8

8
YOUR WEBER GRILL MAY INCLUDE CHAR-BASKET™ CHARCOAL HOLDERS OR CHARCOAL RAILS
USING CHARCOAL RAILS
1. Open the top and bottom vents of the barbecue and remove the lid.
2. Position the charcoal grate so that the steel wires run across the
kettle from handle to handle. By doing this, the charcoal rails will be
installed opposite the kettle handle(s), so that the charcoal will be
away from the handle(s).
3. Position the charcoal rails so they hook over the outside straight
wires of the charcoal grate. The front of the charcoal rails should
slip over the fourth wire of the charcoal grate and click into place.
USING CHAR-BASKET™ CHARCOAL HOLDERS
1. Open the top and bottom vents of the barbecue and remove the lid.
2. Position the Char-Basket™ Charcoal holders opposite the kettle
handle(s), so that the charcoal will be away from the handle(s).
WWW.WEBER.COM
®
CHARCOAL BARBECUE COOKING