Functional Description - Bosch PCM 7 S Original Instructions Manual

OBJ_BUCH-1270-001.book Page 30 Thursday, July 22, 2010 12:44 PM
30 | English
Symbol

Functional Description

Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
Intended Use
The power tool is intended as a stationary ma-
chine for making straight lengthways and cross-
ways cuts in wood. In this, mitre angles from
–47° to +47° as well as bevel angles from 0° to
45° are possible.
The capacity of the power tool is designed for
sawing hardwood and softwood.
The power tool is not suitable for cutting alumin-
ium or other non-ferrous metals or alloys.
Product Features
The numbering of the components shown refers
to the representation of the power tool on the
graphic pages.
1 Handle
2 Laser warning label
3 Lever for releasing the tool arm
4 Blade guard
5 Retracting blade guard
6 Roller
7 Mounting holes
8 Saw table
9 Locking knob for various mitre angles
(horizontal)
10 Tilt protector
11 Insert plate
1 609 929 W43 | (22/7/10)
Meaning
Only for EC countries:
Do not dispose of power tools into household waste!
According the European Guideline 2002/96/EC for Waste Electrical and
Electronic Equipment and its implementation into national right, power
tools that are no longer usable must be collected separately and dis-
posed of in an environmentally correct manner.
12 Angle indicator (horizontal)
13 Scale for mitre angle (horizontal)
14 Saw-Table extension
15 Fence
16 Material clamp
17 Clamping lever for various bevel angles
18 Depth stop
19 Dust bag
20 On/Off switch
21 Laser switch (for marking of cutting line)
22 Sawdust ejector
23 Drill holes for material clamp
24 Transport handle
25 Allen key (size 6 mm)
26 Locking screw for slide device
27 Recessed grips
28 Opening for saw-table extension
29 Transport safety-lock
30 Spindle lock
31 Battery compartment
32 Opening for saw-table extension
33 Allen screw (size 6 mm) for mounting of saw
34 Clamping flange
35 Interior clamping flange
36 Saw blade
37 Wing bolt
38 Threaded rod
39 Angle indicator (vertical)
40 Scale for bevel angle (vertical)
(vertical)
(on saw table base)
(on the second saw-table extension)
blade
Bosch Power Tools