Battery Installation And Replacement / Remote Control Cautions / Operating Range; Remote Control Cautions; Operating Range - NEC MultiSync XV29 Plus User Manual

Battery Installation and Replacement
The remote control is powered by two 1.5V AA batteries.
1. Turn the remote control unit upside down.
Press down on the battery compartment
grip and slide the compartment in the
direction of the arrow.

Remote Control Cautions

• Do not drop or mishandle the remote control unit.
• Do not get the remote control unit wet. If the remote gets wet, wipe it dry
immediately.
• Avoid heat and humidity.
• When not using the remote control unit for a long period, remove the
batteries.
• Do not use new and old batteries together, or use different types of
batteries together.
• Do not take apart the batteries, heat them, or throw them into a fire.

Operating Range

• The infrared signal operates by line-of-sight up to a distance of
approximately 22 feet/7 m and within a 60 degree angle of the remote
sensor of the monitor.
• The monitor will not function if there are objects between the remote
control and the sensor or if strong light falls on the sensor. Weak batteries
will also prevent the remote control from properly operating the monitor.
2. Install the two new batteries, making sure
that their polarity matches the (+) (–)
diagrams inside the battery compartment.
Incorrect polarity could damage the
remote control unit.
3. Close the battery compartment cover.
S
POWER
POWER
VOLUME SOURCE SELECT /STANDBY
RGB2 VIDEO2 L (MONO) R
PROCEED EXIT
AUDIO
30˚ 30˚
POWER
DEGAUSS OFF ON
VIDEO 1 VIDEO 2 RGB 1 RGB 2
POSITION / CONTROL PROCEED
EXIT
SCAN
WIDTH HEIGHT SIDE PIN NORMAL
NORMAL
BRIGHT CONTRAST MUTE VOLUME
MULTIMEDIA MONITOR
RD-346E
79645721
11
12