Advertisement
OPERATION & INSTALLATION MANUAL FOR PC-RLH8/10
5) Draw out the connecting cable from the wiring hole of the indoor unit, and lead the cable over
the suspension bracket of the indoor unit to the installing position of the receiver kit. Bundle
the extra cable with a band.
Connecting cable
Wiring hole of
Indoor Unit
6) Install the air panel (option) onto the indoor unit.
7) Attach the receiver kit in the following procedure.
Draw out the connecting cable from the pocket and connect the connecting cable and the wire
of the receiver kit. After connecting the cable, wrap the connector with the cover and fix them
with a band.
Air Panel
Corner Pocket
Connecting Cable
Receiver Kit
Hook the band on the rear side of
the receiver kit at the pin of the air panel
as shown bellow.
Pin
Band
Suspension Bracket
Connector
Connecting
Band
Cable
Cover
Band
Hook L- shaped nail on the rear side of
receiver kit at the square hole of the air
panel.
3
Advertisement
