Brightness/Contrast Controls - NEC MultiSync LCD195NXM User Manual

Controls

Brightness/Contrast Controls

BRIGHTNESS
Adjusts the overall image and background screen brightness.
CONTRAST
Adjusts the image brightness in relation to the background.
AUTO Contrast (Analog input only)
Adjusts the image displayed to optimal settings.
DV MODE (LCD2070NX, LCD2170NX only)
Allows you to select the suitable setting for Movie, Picture , etc.
Auto Adjust
Automatically adjusts the Image Position, H. Size and Fine settings.
Image Controls
LEFT / RIGHT
Controls Horizontal Image Position within the display area of the LCD.
DOWN / UP
Controls Vertical Image Position within the display area of the LCD.
H.SIZE
Adjust this setting to increase or decrease the horizontal size.
FINE
Adjust this setting to improve focus, clarity, and image stability.
AccuColor
AccuColor
and NATIVE color presets are standard and cannot be changed).
R,G,B: Increases or decreases Red, Green or Blue color depending upon which is
selected. The change in color will appear on screen and the direction (increase or
decrease) will be shown by the bars.
NATIVE: Original color presented by the LCD panel that is unadjustable.
sRGB: sRGB mode dramatically improves the color fi delity in the desktop
environment by a single standard RGB color space. With this color supported
environment, the operator could easily and confi dently communicate color
without further color management overhead in the most common situations.
Tools
SHARPNESS (LCD2070NX/LCD2170NX): This function allows the adjustment of
the crispness of the displayed image at any time. The image can be as distinct or
as soft as the user prefers. The amount of image adjustment is different depending
on whether EXPANSION Mode is set to OFF, FULL or ASPECT.
EXPANSION MODE (LCD2070NX/LCD2170NX): Sets the zoom method.
FULL: The image is expanded to 1600 x 1200, regardless of the resolution.
ASPECT: The image is expanded without changing the aspect ratio.
OFF: The image is not expanded.
RESOLUTION NOTIFIER: This function gives a warning if a resolution other than
- continued
(Analog input only)
(Analog input only)
® Control Systems
Control Systems: Six color presets select the desired color setting (sRGB
®
14