NEC MultiSync LCD195NXM User Manual page 8

Display Setup
NOTE: If you use this monitor at AC125-240V, please refer to
Recommended Use section of this manual for proper selection of
power cord.
10. Turn on the monitor with the front power button and the
computer.
11. Analog input only: No-Touch Auto Adjust automatically adjusts the
monitor to optimal settings upon initial setup for most timings. For
further adjustments, use the following OSD
• Auto Adjust Contrast
Refer to the Controls section of this User 's Manual for a full descrip-
tion of these OSD controls.
NOTE: For download information on the Windows
monitor, refer to the References section of this User's Manual.
NOTE: If you have any problems, please refer to the Troubleshoot-
- continued
Figure 10
Power Button
• Auto Adjust
6
controls:
®
INF fi le for your
®
Figure 11