Option Setup - Denon AVR-1911 Owner's Manual

Option Setup

Make various other settings.
Setting items
Volume Control Volume Display : Set how volume is displayed.
Set the MAIN ZONE (room • Relative : Display ---dB (Min), in the range –80.5 dB – 18 dB.
where the unit is located) • Absolute : Display in the range 0 (Min) – 99.
volume setting.
• The "Volume Display" setting is applied also to the "Volume Limit" and
"Power On Level" display method.
• The "Volume Display" setting applies to all zones.
Volume Limit : Make a setting for maximum volume.
• OFF : Do not set a maximum volume.
• –20dB (61) / –10dB (71) / 0dB (81)
Power On Level : Define the volume setting that is active when the
power is turned on.
• Last : Use the memorized setting from the last session.
• – – – (0) : Always use the muting on condition when power is turned on.
• –80dB – 18dB (1 – 99) : The volume is adjusted to the set level.
Mute Level : Set the amount of attenuation when muting is on.
• Full : The sound is muted entirely.
• –40dB : The sound is attenuated by 40 dB down.
• –20dB : The sound is attenuated by 20 dB down.
Source Delete BD / DVD / TV / SAT/CBL / V.AUX / GAME / DOCK / USB/iPod / HD
Remove from the display Radio / CD : Select input source that is not used.
input sources that are not • ON : Use this source.
used. • Delete : Do not use this source.
NOTE
• Input sources being used in the various zones cannot be deleted.
• Input sources set to "Delete" cannot be selected using
On-Screen Display Screensaver : Make screensaver settings.
Make the settings related to • ON : The screen saver is activated during menu display, iPod, USB/iPod
displays on the TV screen. or HD Radio screen display if no operation is performed for an
approximately 3-minute continuous period. When you press
the screensaver is cancelled and the screen before that screen saver
started is displayed.
• OFF : Screensaver is not activated.
Text : Display the details of operation when switching surround mode,
input mode, etc.
• ON : Turn display on.
• OFF : Turn display off.
Remote control operation
buttons
Default settings are underlined.
Setting details
SOURCE SELECT
.
uio p
,
Move the cursor
(Up/Down/Left/Right)
Setting items
On-Screen Display Master Volume : Display the master volume during adjustment.
(Continued) • Bottom : Display at the bottom.
• Top : Display at the top.
• OFF : Turn display off.
When the master volume display is hard to see when superimposed
on movie subtitles, set to "Top".
USB : Set the USB screen display time when the input source is "USB/
iPod".
• Always : Show display continuously.
• 30sec : Show display for 30 seconds after operation.
• 10sec : Show display for 10 seconds after operation.
• OFF : Turn display off.
iPod : Set the iPod screen display time when the input source is "DOCK"
or "USB/iPod".
• Always : Show display continuously.
• 30sec : Show display for 30 seconds after operation.
• 10sec : Show display for 10 seconds after operation.
• OFF : Turn display off.
TUNER : Set the tuner screen display time when the input source is "HD
Radio".
• Always : Show display continuously.
• 30sec : Show display for 30 seconds after operation.
• 10sec : Show display for 10 seconds after operation.
• OFF : Turn display off.
Remote Preset Codes See "Registering preset codes" (vpage 62).
Search a preset code to
register in the remote
control unit.
Quick Select Name Rename Label : Select this to change the displayed name for "Quick
Change the "Quick Select" Select" shown on the screen, as desired.
display title to one you • Up to 16 characters can be input.
prefer. • For character input, see page 43.
Confirm the setting
ENGLISH
Manual Setup
Setting details
59
Return to previous menu