Dip Switch Tables - Epson TM-H6000III User Manual

English
Labels / Etiketten / Etiketten / Étiquettes / Etiquetas /
Etiquetas / Etichette / Предупреждающие наклейки

DIP Switch Tables

Serial
SW Function
1-1 Data receive error Ignored
1-2 Receive buffer 45 bytes
capacity
1-3 Handshaking XON/XOFF
1-4 Data word length 7 bits
1-5 Parity check Enabled
1-6 Parity selection Even
1-7 Transmission speed (See table below.)
1-8
2-1 Handshaking Receive
(BUSY condition) buffer full
2-2 Customer display Connected Not connected
connection
2-3 Print density See Table A.
2-4
2-5 Internal use. Fixed to Off.
2-6
2-7 I/F pin 6 reset Enabled
2-8 I/F pin 25 reset Enabled
Transmission speed (bps)-bits per second
4800
9600
19200
38400
ii
ON OFF
Prints "?"
4 KB
DTR/DSR
8 bits
Disabled
Odd
Offline or Receive
buffer full
Disabled
Disabled
1-7 1-8
ON ON
OFF ON
ON OFF
OFF OFF
Parallel
SW Function
1-1 Auto line feed Always
enabled
1-2 Receive buffer 45 bytes
capacity
1-3~ Reserved. Fixed to Off.
1-8
2-1 Handshaking Receive
(BUSY condition) buffer full
2-2 Internal use. Do not change setting. Fixed to Off.
2-3 Print density See Table A.
2-4
2-5 Internal use. Fixed to Off.
2-6
2-7 Reserved (for serial interface) Fixed to Off.
2-8 I/F pin 31 reset signal. Do not change setting.
Fixed to On.
Table A
Print density/low power
1 Print density (Light)
2
3
4 Print density (Dark)
ON OFF
Always disabled
4 KB
Offline or Receive
buffer full
SW 2-3 SW 2-4
ON ON
OFF OFF
ON OFF
OFF ON