Terminal Panel - NEC MultiSync LCD8205-P User Manual

Terminal Panel

1
HDMI connector
To input digital HDMI signals.
2
DVI IN (DVI-I)
To input digital or analogue RGB signals from a computer.
3
SPDIF
Optical digital audio out for HDMI input only.
4
EXTERNAL CONTROL (D-Sub 9 pin)
Connect RS-232C input from external equipment such as a
PC in order to control RS-232C functions.
5
Audio Input (for DVI-I connector)
To input audio signal from computer.
6
Component (RCA)
Connecting equipment such as a DVD player, HDTV device
or Set-Top-Box.
7
AV1
AV1: For composite video signal.
Audio L, R: To input audio signal from external equipment
such as a VCR or DVD player.
8
S-Video
S-Video: To input the S-video (Y/C separate signal).
Audio input connects to AV2's Audio L/R.
9
AV2
AV2: For composite video signal.
Audio L, R: To input audio signal from external equipment such
as a VCR or DVD player.
10 AC IN connector
Connects with the supplied power cord.
EXTERNAL SPEAKER TERMINAL
11
To output the audio signal from
Note: This speaker terminal is for 7W + 7W (8 ohm)
speakers.
English-8
, , , , .
1 5 6 7 9