Parrot AR.Drone 2.0 Quick Start Manual page 20

IP address
• Check that the IP address appears on the AR.Drone 2.0 network. To do this:
- If you are using an iPhone, select
of the network "ardrone2".
- If you are using an Android phone, select
Settings
• An IP address starting with 192.168.1. should be displayed in
the IP field.
Connection problem
In case of problem during the connection process between the smartphone and the AR.Drone 2.0 :
- Check the color of the LED on the bottom side of the AR.Drone 2.0 . If it is red or orange,
restart the AR.Drone 2.0 . To do so, disconnect and reconnect the battery. Wait until the LED
turns green.
- On your smartphone, turn the Wi-Fi off and back on.
- For more information, refer to the support section of our website www.parrot.com.
Using the AR.Drone 2.0 with another smartphone
If you wish to use your AR.Drone 2.0 with another smartphone:
1. Launch the AR.FreeFlight 2 then touch
2. Disable the
20 ENGLISH
and select the network "ardrone2".
Pairing option.
Settings > Wi-Fi
and then press the arrow
Settings > Wireless & Networking > Wi-Fi
to the right