Geometry Controls - NEC MultiSync M700 User Manual

Controls cont.
Size and Position
Left/Right: Moves the image horizontally (left or right).
Down/Up: Moves the image vertically (up or down).
Narrow/Wide: Increases or decreases the horizontal size of the image.
Short/Tall: Increases or decreases the vertical size of the image.
Color Control/AccuColor
Color presets 1 through 5 select the desired color setting. The bar is replaced by
the color setting choice from 1 to 5. Each color setting is adjusted at the factory
to the stated Kelvin. If a setting is adjusted, the name of the setting will change
from Kelvin to Custom.
Color Gain: Increases or decreases red, green or blue depending upon which is
selected. The change in color will appear on screen and the direction (increase or
decrease) will be shown by the bars.

Geometry Controls

Geometry Controls Menu
The Geometry controls allow you to adjust the curvature or angle of the sides of
your display.
Sides In/Out (pincushion): Increases or decreases the curvature of the sides either
inward or outward.
Sides Left/Right (pincushion balance): Increases or decreases the curvature of
the sides either to the left or right.
Sides Tilt (parallelogram): Increases or decreases the tilt of the sides either to the
left or right.
Sides Align (trapezoidal): Increases or decreases the bottom of the screen to be
the same as the top.
Rotate (raster rotation): Rotates the entire display clockwise or counterclockwise.
Tools
Provides a list of optional adjustments which include the following:
Surround Mode: Provides 4 preset sound settings for various applications.
Voice/Standard Mode: For use with standard applications and telephony functions.
This mode is factory preset and will remain as the primary setting unless another
sound setting is selected.
Music/Game Mode: Maximizes the treble setting.
Movie/TV Mode: Maximizes the bass setting.
Mono to Stereo Mode: Converts the mono input to stereo sound for a simulated
surround effect.
15500291.wpc
Control System
®
6
8 7/27/99, 3:41 PM