Connecting A Personal Computer; Connect The Lcd Monitor To A Personal Computer - NEC MultiSync LCD3215 User Manual

Connecting a Personal Computer

Connecting your computer to your LCD monitor will enable you to display your computer's screen image.
Some video cards and a pixel clock over 165MHz may not display an image correctly.
Your LCD monitor displays proper image by adjusting the factory preset timing signal automatically.
<Factory preset signal timing>
Scanning frequency
Resolution
Horizontal
640 x 480 31.5kHz
800 x 600 37.9kHz
1024 x 768 48.4kHz
1280 x 768 48kHz
1360 x 768 48kHz
1280 x 1024 64kHz
1600 x 1200 75kHz

Connect the LCD Monitor to a Personal Computer

• To connect the RGB2 connector (mini D-sub 15 pin) on the LCD monitor, use the supplied PC - Video RGB signal cable
(mini D-sub 15 pin to mini D-sub 15 pin).
• To connect the RGB3 connector (BNC) on the LCD monitor, use a mini D-sub 15 pin to BNC x 5 signal cable (sold
separately). Select RGB3 from the INPUT button.
• When connecting one or more LCD monitors, use the RGB OUT connector (mini D-sub 15 pin) (BNC INPUT only).
• AUDIO IN 1, 2 and 3 can be used for audio input. To select audio source [AUDIO:1], [AUDIO:2] or [AUDIO:3] press the
AUDIO INPUT button.
Vertical
60Hz
60Hz
60Hz
60Hz
60Hz Recommended resolution
60Hz Compressed image
60Hz Compressed image
LCD monitor
Remarks
BNC x 5
Mini D-sub 15 pin
Second LCD monitor
English-14
To analog RGB output
Mini D-sub 15 pin
To audio output
PC or IBM compatible