Table of Contents
Advertisement
en
Parts
1. Power cable
2. Integrated cable storage
3. Power switch with indicator light
4. Function selector
- Stand by
- Dispense Espresso
- Pre heating for steam
- Dispense steam
5. Ready" indicator light
6. Lid for reservoir
7. Reservoir (removable)
8. Steam wand (swivelling)
a) Sleeve
b) Nozzle
9. Drip tray (two part)
10. Grille
11. Filter holder
a) Filter for 1 cup
b) Filter for 2 cups
12. Brew head filter
13. Measuring spoon
Read the instruction manual
carefully and keep it for future
reference.
This coffee maker is designed for domestic
use and for producing the volumes required by
a standard household. Not for commercial
use.
Safety information
d
Risk of electric shock
Only connect and operate the appliance in
accordance with the information on the rating
plate.
Do not use if the power cable or appliance
show signs of damage.
Do not use the appliance outside.
Keep children away from the appliance
Unplug the appliance from the mains
immediately in the event of a malfunction.
6
Never immerse the appliance in water.
To avoid potential hazards, appliance repairs,
such as the replacement of a damaged power
cable, must only be carried out by our after
sales service.
d
Risk of burns
Only hold the steam wand by the plastic part.
Never point the steam wand at yourself or
others.
There may be a small amount of spraying at
first as steam is dispensed.
Notes on disposal
For current disposal methods, please enquire
at your specialist dealer or local authority.
Operation
(figures a d)
S
Connect the appliance to the mains.
S
Remove reservoir (7), fill it with fresh water
and replace it.
Observe the max. mark.
S
Set power switch (3) to I", the indicator
light lights up red.
Info: The appliance now starts to heat up
and is ready for operation when ready"
indicator light (5) lights up green.
Prior to first use or after a long period out of
use, the coffee maker should be flushed out by
dispensing several cups of water (without
ground coffee).
S
Fit filter carrier (11) containing filter (11a) to
the filter carrier guide on the left hand side
of the recess (figure c) and turn it to the
right as far as the stop.
S
Place a large vessel under filter holder (11).
S
Turn function selector (4) to
vessel with water.
S
Turn function selector (4) back to
and fill the
.
Advertisement
Table of Contents
