Specifications - NEC MultiSync FP955 User Manual

Monitor

Specifications

Picture Tube
Viewable Image Size:
Input Signal
Analog input:
Display Colors
Horizontal:
Synchronization
Range
Resolutions Supported
Resolution based on horizontal and
vertical frequencies only
Horizontal:
Active Display Area
(Factory Setting)
Active Display Area
(Full Scan)
Power Supply
Current Rating
Dimensions
Weight
Environmental Considerations
Operating Temperature:
Storage Temperature:
FP955.wpc
MultiSync ® FP
Monitor
Diagonal: 50 cm/19 inch
458 mm/18 inch
Radius: 50,000 mm
Video: ANALOG 0.7 Vp-p/75 Ohms
Sync: Separate sync. TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Composite sync. (Positive/Negative) (TTL Level)
Sync on Green video (Positive) 0.7 Vp-p and sync
(Negative) 0.3 Vp-p
Unlimited number of Colors
30 kHz to 110 kHz
Vertical: 50 Hz to 160 Hz
640 x 480 @ 50 to 160 Hz
800 x 600 @ 50 to 160 Hz
832 X 624 @ 50 to 160Hz
1024 x 768 @ 50 to 132 Hz
1152 x 870 @ 50 to 118 Hz
1280 x 1024 @ 50 to 101 Hz ................... NEC-Mitsubishi Electronic Display cites
1600 x 1200 @ 50 to 87 Hz
1792 x 1344 @ 50 to 78 Hz
1800 x 1440 @ 50 to 73 Hz
1856 x 1392 @ 50 to 75 Hz
1920 x 1440 @ 50 to 73 Hz
356 mm/14.0 inches
Vertical: 267 mm/10.5 inches
366 mm/14.4 inches
275 mm/10.8 inches
AC 100 – 120 V/220 - 240 V, 50/60 Hz
1.8A @ 100 – 120 V / 0.9A@ 220-240 V
442 mm (W) x 468.3 mm (H) x 448.6 mm (D)
17.4 inches (W) x 18.4 inches (H) x 17.7 inches (D)
24 kg
52.9 lbs
+10°C to +35°C/+50°F to +95°F
Humidity: 30% to 80%
Altitude: 0 to 10,000 Feet
-20°C to +60°C/-4°F to +140°F
Humidity: 10% to 90%
Altitude: 0 to 45,000 Feet
NOTE: Technical specifications are subject to change without notice.
11
13
™ Notes
955
90° deflection, 0.24 grille pitch,
medium short persistence phosphor,
aperture grille CRT, multi-layered,
anti-static screen coating, semi-dark-tint
screen, and OptiClear ®
Depends on display card used.
Automatically
Automatically
Some systems may not support
all modes listed.
recommended resolution at 85 Hz for
optimal display performance.
Dependent upon signal timing used,
and does not include border area.
Dependent upon signal timing used,
and does not include border area.
1/23/01, 12:14 PM
screen surface.