Sharp MD-MT770 Operation Manual page 106

If you press the CLEAR button during this operation, the previ-
ous display appears.
To cancel the operation, move the M button toward
Moving a group to the top (GROUP TOP MOVE)
The recorded group can be moved to the beginning of the MiniDisc.
1. When in the stop mode, select the group you want to move.
2. Press the M button.
The unit enters the menu select mode.
3. Move the M button toward 5 or 4 to select "G (GROUP)"
and press it.
4. Move the M button toward 5 or 4 to select "T
(GrTOPMOVE)" and press it.
5. Press the M button again.
Select the menu within 25 seconds.
If you press the CLEAR button during this operation, the previ-
ous display appears.
To cancel the operation, move the M button toward
Erasing a group (GROUP ERASE)
You can erase all tracks in a group at once.
1. When in the stop mode, select the group you want to erase.
2. Press the M button.
The unit enters the menu select mode.
3. Move the M button toward 5 or 4 to select "G (GROUP)"
and press it.
4. Move the M button toward 5 or 4 to select "E
(Gr&TrERASE)" and press it.
5. Press the M button again.
Select the menu within 25 seconds.
If you press the CLEAR button during this operation, the previ-
ous display appears.
To cancel the operation, move the M button toward
Creating a group before recording (GROUP RESERVE)
You can create a group in advance and record tracks into it.
1. When in the stop mode, press the M button.
106 The unit enters the menu select mode.
2. Move the M button toward 5 or 4 to select "G (GROUP)"
and press it.
. 3. Move the M button toward 5 or 4 to select "R
(GrRESERVE)" and press it.
You can enter characters now.
4. Enter the group name.
Otherwise you will not be able to create a group.
5. Hold down the M button for 1 second or more.
Select the menu within 25 seconds.
If you press the CLEAR button during this operation, the previ-
ous display appears.
To cancel the operation, move the M button toward
Positioning non-group tracks after group-recorded
tracks (GROUP ARRANGE)
If non-group tracks are located in the middle of tracks that were
group-recorded with other equipment, you can move them to the
.
end of the disc.
1. When in the stop mode, press the M button.
The unit enters the menu select mode.
2. Move the M button toward 5 or 4 to select "G (GROUP)"
and press it.
3. Move the M button toward 5 or 4 to select "A
(GrARRANGE)" and press it.
4. Press the M button again.
Select the menu within 25 seconds.
If you press the CLEAR button during this operation, the previ-
ous display appears.
To cancel the operation, move the M button toward
Erasing group information (GROUP CANCEL)
You can erase the entire group information.
.
After the group information has been erased, the MiniDisc will
change to a non-group MiniDisc.
1. When in the stop mode, press the M button.
The unit enters the menu select mode.
2. Move the M button toward 5 or 4 to select "G (GROUP)"
and press it.
.
.