Monitor Specifications - NEC 90 User Manual

Specifications cont.
Monitor
Specifications
Picture Tube
Viewable Image Size:
Input Signal
Analog input:
Display Colors
Horizontal:
Synchronization
Range
Resolutions Supported
Resolution based on horizontal and
vertical frequencies only
Horizontal:
Active Display Area
(Factory Setting)
Active Display Area
(Full Scan)
Power Supply
Current Rating
Dimensions
Weight
Environmental Considerations
Operating Temperature:
Storage Temperature:
15500251.wpc
MultiSync ® 70
Monitor
Diagonal: 17 inch
16.0 inch
Radius: 1210 mm
Video: ANALOG 0.7 Vp-p/75 Ohms
Sync: Separate sync. TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Composite sync. (Positive/Negative) (TTL Level)
Unlimited number of Colors
31 kHz to 69 kHz
Vertical: 55 Hz to 120 Hz
640 x 480 @ 60 to 120 Hz
800 x 600 @ 55 to 109 Hz
832 x 624 @ 55 to 103 Hz
1024 x 768 @ 55 to 85 Hz ....................... NEC cites recommended resolution at
1152 x 870 @ 55 to 76 Hz
1280 x 1024 @ 55 to 65 Hz
310 mm/12.2 inches
Vertical: 232 mm/9.1 inches
325 mm/12.8 inches
244 mm/9.6 inches
AC 100 – 240 V, 50/60 Hz
1.8A @ 100 – 240 V
403 mm (W) x 427 mm (H) x 440 mm (D)
15.9 inches (W) x 16.8 inches (H) x 17.3 inches (D)
17.5 kg
38.5 lbs
0 C to +35 C
Humidity: 30% to 80%
Feet: 0 to 10,000 Feet
-20 C to +60 C
Humidity: 10% to 90%
Feet: 0 to 45,000 Feet
NOTE: Technical specifications are subject to change without notice.
10
12
Notes
90 deflection, 0.28 mm trio dot pitch,
medium short persistence phosphor,
multi-layered, anti-static screen coating,
semi-tint screen, Invar Shadow Mask and
OptiClear screen.
®
Depends on display card used.
Automatically
Automatically
Some systems may not support
all modes listed.
75 Hz for optimal display performance.
Dependent upon signal timing used,
and does not include border area.
Dependent upon signal timing used,
and does not include border area.
5/7/99, 12:54 PM