Quickie HeliX2 Directions For Use Manual page 22

Technical Data
POSSIBlE SEAT-hEIGhT ADJUSTMENTS
The seat height matrix shows the possible seat height adjustments
including the options with castor and rear wheels and fitting
positions.
Please refer to page 5 for details.
CAUTION:
Measured without seat cushions.
DYNAMIC SAFE SlOPE
The Dynamic safe slope is dependant on the chair configuration,
the users abilities and the style of riding.
As the users abilities and style of riding cannot be predetermined
then the max safe slope cannot be determined. Therefore this must
be determined by the user with the assistance of an attendant to
prevent tipping.
WARNING!
It is strongly recommended that inexperienced users have Ant-tips
fitted.
In Accordance with EN12183: 2009 all there listed parts (seat - back
upholstery, arm pad, side panel...) are fire resistant as per EN1021-2
.
The wheelchair conforms to the following standards:
a) Requirements and test methods for static, impact and fatigue
strengths (ISO 7176-8).
b) Requirements for resistance to ignition in accordance with ISO
7176-16 (EN 1021-1).
22 HeliX
2