Others - Pioneer BCS-424 Operating Instructions Manual

72 Troubleshooting
En

Others

Problem
Power does not
turned on.
Power turns OFF without
warning
The player's power turns
off automatically.
The player's power turns
on automatically.
Cannot be operated with
the remote control.
Settings I have made have
been cleared.
USB (external storage)
device does not work with
this player properly.
Display window is dark
9
Check
Is the power cord properly
connected?
Is Control set to On?
Is Control set to On?
Are you operating the remote
control from a point too far
away from the player?
Are the batteries dead?
y Have you disconnected the
power cord while the player's
power was on?
y Has there been a power
failure?
Is the USB device properly
connected?
Is the USB device connected
via an extension cable?
Is the external storage device
connected to the USB port via
a memory card reader or USB
hub?
Does the external storage
device contain multiple
partitions?
Is the external storage device
write-protected?
Is the external storage device's
file system FAT16 or FAT32?
Remedy
y Plug the power cord securely into the power outlet.
y Unplug the power cord, wait several seconds, then plug the power
cord back in.
minute and will automatically power OFF in about 30 minutes. Auto Power Of is set. The display will move to screen saver mode in 1
The player's power may turn off together with the power of the TV
connected to the HDMI OUT terminal. If you do not want the player's
power to turn off when the TV's power is turned off, set Control to Of
(page 59).
The player's power may turn on together with the power of the TV
connected to the HDMI OUT terminal. If you do not want the player's
power to turn on when the TV's power is turned on, set Control to Off
(page 59).
Operate from within 7 m of the remote control sensor.
Replace the batteries (page 9).
Always press  STANDBY/ON on the player's front panel or 
off from the player's front panel display and wait for more than 10 STANDBY/ON on the remote control, check that POWER OFF has turned
seconds before disconnecting the power cord. Be particularly careful
when the power cord is connected to the AC outlet on another device
because the player turns off in conjunction with the device.
y Turn the player's power off, then turn the power back on.
y Turn the player's power off, then reconnect the external storage device
(page 35).
Do not use an extension cable. The player may not work properly with it.
External storage device may not work if connected to the USB port via a
memory card reader or USB hub.
External storage devices may not be recognized if they contain multiple
partitions.
Some external storage devices may not operate.
Turn the player's power off, then disable the write-protection.
Only external storage devices with a FAT16 or FAT32 file system can be
used.
Turn the player's power off, then turn the power back on.
Press the DIMMER on the remote and select the desired display
brightness.