Disposal Of The Unit; Features - Sony LMD-440 Operatng Instructions

not use any type of abrasive pad, scouring powder or
solvent, such as benzine.
• Do not rub, touch, or tap the surface of the screen with
sharp or abrasive items such as a ball-point pen or
screwdriver. This type of contact may result in a
scratched picture panel.
• Clean the screen with a soft cloth. If you use a glass
cleaning liquid, do not use any type of cleaner
containing an antistatic solution or similar additive as
this may scratch the screen's coating.

Disposal of the unit

• Do not dispose of the unit with general waste. Do not
include the monitor with household waste.
• The fluorescent tube includes mercury. Dispose of the
monitor in accordance with the regulations of your
local sanitation authority.
If you have any questions about this unit, contact your
authorized Sony dealer.

Features

Two 7-type wide LCD panels are mounted for LMD-
720W, three 5.6-type LCD panels are mounted for
LMD-530 and four 4-type LCD panels are mounted for
LMD-440.
High brightness LCD panel
Because the monitor uses high brightness and high
contrast technology, it can be used under various
lighting conditions.
Rack mount monitors with tilt function
LMD-720W and LMD-530 are mounted to a 3U size
rack and LMD-440 is mounted to a 2U size rack. All the
monitors are equipped with tilt function. They can be
installed to a 19-inch standard rack. They are essential
when space is at a premium in crowded OB vehicles.
Vertical arrangement of controls for easy
operation and unitary layout
The controls of three models are laid out vertically and
have a unitary design. When the monitor is tilted
downward, it is easy to operate.
Lightweight, thin design/AC power
adaptor mount function
The lightweight, thin design reduces the load for an OB
vehicle and the space needed for the equipment. Also,
an AC power adaptor can be installed to the rear of the
monitor for easy use.
Two color system available
The monitor can display NTSC and PAL signals. The
appropriate color system is selected automatically.
SDI optional input function
SDI signals can be available when input adaptor BKM-
320D (optional) is attached. The adaptor can be
attached to each monitor.
Energy-saving design
Because of the low power consumption LMD-720W
22W, LMD-530 22W and LMD-440 18W electric
power, the generation in an OB vehicle is reduced.
Remote function
The switching of an optional input (when BKM-320D is
connected) and video input, tally lamp and aspect ratio
(LMD-720W only) can be controlled by an external
equipment.
3-color tally lamp
The tally lamp lights in red, green or amber to monitor
each input picture and check the on-air mode. The tally
function can be operated with the remote function.
Aspect setting (LMD-720W only)
You can set the monitor to 16:9 or 4:3 when a video
signal is input.
5
GB
Features