Setting The Bnc Connectors; Checking The Signal Being Transmitted To Rgb1 Terminal; Setting A Computer Image To The Correct Rgb Select Screen - NEC PlasmaSync 42VP4 User Manual

"V"
OPTION1
OSM
BNC INPUT
: RGB
D-SUB INPUT
: RGB
RGB SELECT
: AUTO
HD SELECT
: 1080B
INPUT SKIP
: OFF
ALL RESET
: OFF
1024 768
SEL. MENU/ENTER OK
EXIT RETURN
Only effective when Advanced OSM is OFF.
OSM ORBITER settings
ON ........ The position of the menu will be shifted by
eight dots each time OSM is displayed.
OFF ...... OSM will be displayed at the same position.
Restoring the factory default settings
Select "ALL RESET" under the OPTION1 menu. Note
that this also restores other settings to the factory
defaults except for Auto Picture.

Setting the BNC connectors

Select whether to set the input of the 5 BNC connectors to
RGB and component.
Example: Set the BNC INPUT mode to "COMP."
Press the MENU/ENTER button on the remote control to
display the MAIN MENU on the screen, then...
1. Use the and buttons to select "OPTION1", then
press the MENU/ENTER button.
The "OPTION1" screen appears.
2. Use the and buttons to select "BNC INPUT".
3. To set the BNC INPUT mode to "COMP."...
Use the and buttons to select "COMP.".
The mode switches as follows each time the
button is pressed:
RGB COMP.
OPTION1
OSM
BNC INPUT
D-SUB INPUT
RGB SELECT
HD SELECT
INPUT SKIP
ALL RESET
NEXT PAGE
SEL. ADJ.
4. Once the setting is completed...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once
more.
Information
BNC INPUT Settings
RGB ......... Use the 5BNC terminals for RGB input.
COMP. ...... Use the 3BNC terminals for component
input.
Restoring the factory default settings
Select "ALL RESET" under the OPTION1 menu. Note
that this also restores other settings to the factory
defaults.
or
1 / 3
: COMP.
: RGB
: AUTO
: 1080B
: OFF
: OFF
EXIT RETURN
Checking the signal being transmitted to
RGB1 terminal
Use this to confirm the signal being transmitted to the
RGB1 terminal.
It is set to RGB and can not be adjusted.
OSM
BNC INPUT
D-SUB INPUT
RGB SELECT
HD SELECT
INPUT SKIP
ALL RESET
NEXT PAGE
CAN NOT ADJUST
Setting a computer image to the correct RGB
select screen
With the computer image, select the RGB Select mode
for a moving image such as (video) mode, wide mode or
digital broadcast.
Example: Setting the "RGB SELECT" mode to
"MOTION "
Press the MENU/ENTER button on the remote control to
display the MAIN MENU on the screen, then...
1. Use the and buttons to select "OPTION1", then
press the MENU/ENTER button.
The "OPTION1" screen appears.
2. Use the and buttons to select "RGB SELECT".
3. To set the RGB select mode to "MOTION" ...
Use the and buttons to select "MOTION".
The mode switches as follows each time the
button is pressed:
AUTO STILL MOTION
OSM
BNC INPUT
D-SUB INPUT
RGB SELECT
HD SELECT
INPUT SKIP
ALL RESET
NEXT PAGE
SEL.
4. Once the setting is completed ...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once
more.
24
1 / 3
OPTION1
: RGB
: RGB
: AUTO
: 1080B
: OFF
: OFF
WIDE1 WIDE2
OPTION1 1 / 3
: RGB
: RGB
: MOTION
: 1080B
: OFF
: OFF
ADJ. EXIT RETURN
or
DTV