Setting The Allocation Of The Audio Connectors; Image Adjust Settings Menu; Adjusting The Position, Size, Fine Picture, Picture Adj - NEC PlasmaSync 42VP4 User Manual

Setting the allocation of the audio connectors

Setting the AUDIO 1, 2, and 3 connectors to the desired
input.
Example: Setting "AUDIO INPUT1" to "VIDEO 2"
Press the MENU/ENTER button on the remote control to
display the MAIN MENU on the screen, then...
1. Use the and buttons to select "AUDIO", then press
the MENU/ENTER button.
The "AUDIO" screen appears.
2. Use the and buttons to select "AUDIO INPUT1".
3. To set the AUDIO INPUT1 to "VIDEO2"...
Use the and buttons to select "VIDEO2".
The mode switches as follows each time the
button is pressed:
The available sources depend on the setting of "BNC
INPUT".
VIDEO1 VIDEO2
RGB:
RGB3 RGB2
VIDEO1 VIDEO2
COMP.:
RGB3 RGB1
BASS
TREBLE
BALANCE
AUDIO INPUT1
AUDIO INPUT2
AUDIO INPUT3
SEL. ADJ.
4. Once the setting is completed...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once
more.
Information
AUDIO INPUT
A single audio input cannot be selected as the audio
channel for more than one input terminal.
Restoring the factory default settings
Select "ALL RESET" under the OPTION1 menu. Note
that this also restores other settings to the factory
defaults.
VIDEO3 HD/DVD1
RGB1
VIDEO3 HD/DVD1
HD/DVD2
AUDIO
: VIDEO2
: HD/DVD1
: RGB1
EXIT
RETURN

Image Adjust Settings Menu

Adjusting the Position, Size, Fine Picture, Picture Adj

The position of the image can be adjusted and flickering
of the image can be corrected.
Example: Adjusting the vertical position in the normal
mode
Press the MENU/ENTER button on the remote control to
display the MAIN MENU on the screen, then...
1. Use the and
then press the MENU/ENTER button. The "IMAGE
ADJUST" menu appears.
Default settings (when RGB/PC is selected)
or
ASPECT MODE
V-POSITION
H-POSITION
V-HEIGHT
H-WIDTH
AUTO PICTURE
FINE PICTURE
PICTURE ADJ.
SEL.
* The settings on the IMAGE ADJUST menu are not
preset at the factory.
To select a mode ...
Use the and
The mode switches as follows when the
buttons are pressed:
NORMAL FULL
* The mode can also be switched by pressing the "WIDE"
button on the remote control.
2. To adjust the vertical position ...
Use the and
ASPECT MODE
V-POSITION
H-POSITION
V-HEIGHT
H-WIDTH
AUTO PICTURE
FINE PICTURE
PICTURE ADJ.
SEL.
3. Adjust using the
V-POSITION
* If neither the
the current setting is set and the previous screen
reappears.
To continue making other computer image
adjustments ...
Repeat from step 2.
4. Once all adjustments are completed ...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once
more.
22
buttons to select "IMAGE ADJUST",
IMAGE ADJUST
: NORMAL
: OFF
ADJ. EXIT RETURN
buttons to select a mode.
buttons to select "V-POSITION".
IMAGE ADJUST
: NORMAL
: OFF
ADJ. EXIT RETURN
and buttons.
or button is pressed within 5 seconds,
and