f\
Caution: Unplug power when disconnecting and
connecting connectors on the board.
Condenser Fan Not Running
Ctreck torvotage at main boad
J2.
ls there at lsast 12VDC b€tween
pins 3 - 5 and betucen 3 - 8?
Run Service Dhgnosfic Test (1€ )
Pre-Chill - see page 33 tor enterirg
diagnostic mode.
ls the condenser tan running?
Remorre J2 connectorlrom lhe main
board.
Chec* for rcsistance between the white
wire and rcd wire on hamess
ls the resistance approximately 1.5K
ohms to 3K ohms?
Measure the resistance directty at the
Condenser fan motod
ls the resistance approximatelty 1.5K
ohms to 3K otms?
Does the condenserfan motor read
open?
- 4 9 -