Sears PSS Series Service Information page 35

the refrigerator display. When a test code has been entered, the displays willflash to confirm the test
code. Press any button other than a temperature adjust button to begin the test.
When testing has been completed, do one of the following things:
.
Enter code 1 5 to completely reset the system.
.
Enter code 1 6 to exit diagnostic mode. The temperature control panel is reset automaticatly.
.
Unplug the refrigeratorfor at least 10 seconds. Test mode willterminate when the refrigerator is
plugged back in.
Test mode willterminate automatically after 15 minutes of inactfuity.
c
r
Temperature Control Panel (Single-Diglt Display)
- u -