Wall Mounting Instructions - Monster JP 900 Instructions And Warranty Information

WALL-MOUNTING INSTRUCTIONS
The surge protector comes with keyholes for convenient wall-mounting.
1. Select the best location to mount the surge protector and mark
the position for the four mounting screws (screws not supplied).
2. Drive pan-head screws with spacer eyelets into the wall (use drywall anchors for
hollow walls) at the locations you marked, leaving the eyelet exposed.
3. Position the key-holes on the back of the unit over the screw/eyelets and slide
the surge protector down until it locks into position.
ENGLISH