Monster JP 900 Instructions And Warranty Information page 13

• Turn the surge protector switch on.
• Make sure the surge protector's AC power plug is plugged into a properly grounded 120 volts (nominal)
wall outlet.
• In some households, a wall switch may need to be thrown to make the wall plug active. Try turning on the
light switches located near the wall unit.
• Press the surge protector main power switch to "OFF" and then again to "ON" to reset.
• Turn the surge protector On.
• Turn On the component plugged into the Switched outlet.
• Connect your surge protector to a dedicated outlet.
• Try unplugging different components from the surge protector one at a time to see if the noise stops.
• Make sure all components are plugged into surge protector.
Contact a qualified electrician to check outlet(s) for proper grounding.
REMEdY
ENGLISH