NEC EXPRESS5800 User Manual page 23

If you click the downward arrow at the right end of the tab, then a menu item for changing the
priorities of tasks (Settings) and those for starting tasks appear.
Settings menu
Rebuild Rate
Logical Drive Initialization
Rate
Media Patrol Rate
Redundancy Check Rate
Migration Rate
PDM Rate
Transition Rate
Reassigned Block
Threshold
Error Block Threshold
Enable Media Patrol
Enable Auto Rebuild
When you change a setting value but want to return it to the value at the screen display, click
[Reset]. To change a setting value and enable the new value, click [Submit]. To return to the
recommended default value (set in the above screen image), first click [Default] and then
[Submit].
Set the priority of rebuild processing. The default is Medium.
Set the priority of logical drive initialization. The default is Medium.
Set the priority of media patrol. The default is Low.
Set the priority of redundancy check. The default is Medium.
Set the priority of expansion. The default is Low.
Set the priority of PDM. The default is Medium.
Set the priority of transition. The default is Medium.
Set the reassigned block threshold. The default is 32.
Set the error block threshold. The default is 32.
Set whether the media patrol is enabled or not. The default is
[Enable].
Set whether the auto rebuild is enabled or not. The default is [Enable].
- -
18