Manual Rebuild - NEC EXPRESS5800 User Manual

Express5800 series web-based promise array disk array controller
Hide thumbs Also See for EXPRESS5800:
Table of Contents

Advertisement

3.10.3 Manual Rebuild

For manual rebuild, follow the procedure below.
1. Click a degraded disk array in the Tree View.
2. Click the arrow at the right end of the Background Activities tab in the Management Window
and select Start Rebuild
3. Specify source and target HDDs on rebuild.
Source Physical Drive
Target Physical Drive
4. Click [Submit].
During the rebuild operation, the progress appears in the Background Activities tab.
As soon as the rebuild is completed, the status display of logical drives is returned to the normal
state.
NOTES:
Specify a normal physical drive used to configure a logical
drive in the critical state.
Specify the target HDD on rebuild.
After rebuild is completed, be sure to see the event log
to check whether one or more errors occur during the
rebuild. If a media error occurred, a message
indicating the occurrence appears before the message
showing that the rebuild is completed without any
problem.
To install a new HDD for replacement, wait for 90 sec
or longer after the removal of the defected HDD.
-
-
51

Advertisement

Table of Contents
loading

This manual is also suitable for:

N8103-105

Table of Contents