Selected Settings Of The Falk Navigator; Volume; Brightness; Speed Camera Detector - FALK FLAT XL Quick Start Manual

Selected settings of the Falk Navigator

You get to the settings menu if you tap on the Settings button on the main menu. The settings menu comprises 4 pages.
You can scroll through the pages using the blue arrow.

Volume

Allows the volume of the navigation device to be varied. It is also possible to regulate the volume of individual func-
tions separately. The sound of the device can be muted via the loudspeaker symbol.

Brightness

Changes the brightness settings for the daytime view and nighttime view and gives you the option of setting which
mode is to be used.

Speed camera detector

You can receive a warning about fixed traffic monitoring devices. This function has to be activated proactively
by means of a download from the Internet. The speed camera detector is not activated when the product is
delivered.
General note:
Some countries ban the use and carrying of a speed camera detector that is ready to be operated while you are trav-
elling. Please ensure that this ban does not apply to the country you are presently in. You activate and use the speed
camera detector at your own risk.
Note on Switzerland:
FMI products do not contain any speed camera data for Switzerland. This data is not available to download over the
Internet either.
Note on using the speed camera detector in Germany:
"Operation of the speed camera detector and the carrying of a speed camera detector which is ready to operate is
prohibited within the area of application of the German Road Traffic Regulations (STvO) pursuant to § 23 section 1b
of the STvO. Please note that the speed camera detector may only be used for route planning and must be switched
off while you are travelling."
Starting the speed camera detector in 5 steps
1. Install the Falk Navi-Manager on your PC. You will find more detailed information on how to install the Falk Navi-
Manager in Chapter 7.
2. Connect your navigation device via a USB cable to your PC. Your PND will be detected via ActiveSync.
3. Start the Falk Navi-Manager on your PC by going to Start/Programs/Falk/Navi-Manager or by double-clicking the
Falk Navi-Manager icon on your desktop.
EN
4. The Falk Navi-Manager will then check whether new data is available to download. If new speed camera data is
available, place a tick in the dialogue window to download this data to your device.
You can also use the Navi-Manager to define whether there should be an automatic update search for new speed
camera data every time you launch the program.
5. PND: if you want to use the speed camera detector, you first need to activate it before you set off. Use the main
menu to select the Settings button. Then select the Speed camera detector button. The speed camera detector
is activated when the symbol is no longer crossed through.
36