Switching The Device On/Off; Attaching The Power Charger Cable (Not Supplied With The Product) - FALK FLAT XL Quick Start Manual

Firmly attach the base of the mounting bracket and
push the locking lever away from yourself. This causes
the suction base to suck tight onto the surface below.
If you want to remove the base of the mounting bracket
again, pull the locking lever towards yourself.
In addition, you should pull on the lug located on the
suction cup to release the mounting bracket.

Switching the device on/off

The standard way to switch the device on and off is
to briefly press the on/off switch
on the top of the device.
Please ensure that the device is charged up before-
hand or is being supplied with power at this moment.
If the battery voltage drops below a minimum value,
the device switches off as continued use of the navi-
gation device could damage the battery. In this situa-
tion, the device cannot be switched on via the on/off
switch either. To be able to switch the device on again,
you need to charge it up with the aid of a car charger
cable or a separate power adapter.
Attaching the power charger cable
(not supplied with the product)
Attach the power adapter to charge up the battery of
your device. To do this, you need to connect the thin
end of the power adapter to the input
tom of the navigation device and plug the thick end
into a plug socket.
During the charging process, the battery charger in-
dicator glows red. When the battery is charged, the
indicator switches to white.
If your battery is fully discharged, it needs to be
charged up for at least a few minutes before you can
switch the device back on again.
5 , which is located
EN
on the bot-
9
29