Panasonic Toughbook CF-17 Series Supplementary Instructions Manual page 4

First-time Operation
4
Select [Next] at the [Card Executive 2.0 for NT Diagnostics].
32
Select [Next], then select [Finish].
Windows will restart. Select "Windows NT Workstation Version 4.00" and press
The [Begin Logon] display will appear. Perform the operation in step
33
34 In [Start] – [Settings] – [Control Panel], select [Multimedia].
Select [Devices], then press [Add].
35
Select [Unlisted or Updated Driver], then press [OK].
36
Input [c:\util\drivers\sound], then press [OK].
37
Select [NeoMagic MagicMedia 256], then press [OK].
38
At the confirmation message, press [OK], then press [Don't Restart Now].
39
Press [OK].
40
In [Start] – [Settings] – [Control Panel], select [Ports].
41
Press [Add].
42
Set [COM Port Number] to [5].
43
Set [Base I/O Port Address] to [108].
44
Set [Interrupt Request Line(IRQ)] to [10].
45
Add the check mark to [FIFO Enabled], then press [OK].
46
47 Press [Don't Restart Now], then Press [Close].
In [Start] – [Settings] – [Control Panel], select [Modem].
48
Add the check mark to [Don't detect modem; I will select it from a list], then press [Next].
49
Press [Have Disk].
50
Input [c:\util\drivers\modem], then press [OK].
51
Select [Xircom MPCI Modem 56 WinGlobal], then press [Next].
52
Select [COM5], then press [Next].
53
Press [Finish], then press [Close].
54
Double-click the [Internet Explorer] icon to install Internet Explorer.
55
Follow the on-screen instructions.
At the [Installation Option], by clicking , select [Full Installation], then select [Next].
At the [Confirm File Replace], press [No].
Windows will restart. Select "Windows NT Workstation Version 4.00" and press
NOTE
Close the unnecessary windows.
The [Begin Logon] display will appear. Perform the operation in step
56
In [Start] - [Run], input [c:\util\msupdate\EN-X86-Q234680], then select [OK].
57
Follow the on-screen instructions. (EN-X86-Q234680.EXE is a file for IE4.01 SP2 Y2K.)
If the display asks you to restart Windows, select [Yes].
Windows will restart. Select "Windows NT Workstation Version 4.00" and press
When the message [Press <F2> to enter SETUP] is displayed, press F2 and then run the
58
Setup Utility.
Enter
.
.
15
.
Enter
.
15
Enter
.