NEC MultiSync LCD1810X User Manual page 29

Installation
Return the stand to its original position, remove the 4 screws
that connect the monitor to the stand, and lift off the stand
assembly. (Figure S.4)
5. Reverse this process to reattach stand.
NOTE: Use only VESA-compatible alternative mounting method.
Figure S.2
Caution: To fulfil the safety requirements the monitor must be mounted
to an arm which guaranties the necessary stability under consideration
of the weight of the monitor.
The LCD monitor shall only be used with an approved arm (e.g. GS mark).
CN912B-2/LCD1810X/78135322
55mm
Figure S.1
Figure S.3
29
E - 14
4
3
1
2
Figure S.4
00.5.26, 0:03 PM