NEC MultiSync LCD1810X User Manual page 18

E - 3 Introduction to the NEC MultiSync LCD
1810X
Pivoting Stand
Allows users to adjust the monitor to the orientation that best fits their
application, either Landscape orientation for wide documents, or portrait
orientation for the ability to preview a full page on one screen at one time.
The Portrait orientation is also perfect for full screen video conferencing.
Plug and Play
The Microsoft solution with the Windows operating system facilitates
setup and installation by allowing the monitor to send its capabilities
(such as screen size and resolutions supported) directly to your computer,
automatically optimizing display performance.
IPM (Intelligent PowerManager) System
Provides innovative power-saving methodes that allow the monitor to
shift to a lower power consumption level when on but not in use, saving
two-thirds of your monitor energy cost, reducing emissions and lowering
the air conditioning cost of the workplace.
Multiple frequency Technology
Automatically adjusts monitor to the display card's scanning frequency,
thus displaying the resolution required.
FullScan Capability
Allows you to use the entire screen area in most resolutions, significantly
expanding image size.
VESA Standard Mounting Interface
Allows users to connect their MultiSync monitor to any VESA standard
third party mounting arm or bracket. Allows for the monitor to be
mounted on a wall or an arm using any third party compliant device.
DVI/D-SUB
Offers dual inputs, allowing you to connect the monitor to one system
via the included DVI cable and to another system via a standard D-Sub
cable (not included). You can easily switch between computers with a
touch of a button on the up-front control panel.
CN912B-2/LCD1810X/78135322 18 00.5.26, 0:03 PM