Connecting The Hardware - ZyXEL Communications ZyWall 1050 Quick Start Manual

Connecting the Hardware

Make sure that the power switch on the rear panel is turned off before
you make the hardware connections.
1. It is recommended that you configure the ZyWALL before using it to
protect your network. Use an Ethernet cable to connect a computer to
port 1.
2. Use another Ethernet cable(s) to connect port 2 and/or port 3 to an
Ethernet jack with Internet access.
3. Use the included power cord to connect the power socket on the rear
panel to a power outlet.
ENGLISH
5