Power Connection; Time And Calendar Setting - Akai AR-130 Instruction Manual

POWER CONNECTION

Plug the AC power cord to a household outlet AC source. This unit is
equipped with a battery back up system, it requires a 3V CR2032 flat
lithium battery (not included). Insert the battery in the battery
compartment, making certain that the positive and negative (+ and -)
battery terminals are attached to the corresponding terminals on the
plate in the battery compartment. If an AC power failure occurs, the clock
automatically switches to the battery power supply, the clock and timer
memory continue running. When the AC power resumes, the clock
switches back to AC again.

1. TIME AND CALENDAR SETTING

A. Setting Time and Calendar – press mode set button (9) in normal
mode and keep depress over 2 seconds to enter time set mode, after
enter the setting mode, press mode set button (9) to change the mode
cycle as follows.
Normal g Year g Month g Day g 12/24 H g RTC Hour g RTC Min g
Normal
Action (during data adjustment) :
- Press << / TEMP / °C / °F button (6) to adjust data backward
- Press >> / Y-M-D / DST button (2) to adjust data forward
- Keep depress << or >> button for 2 seconds to enable auto forward.
B. Setting Alarm 1 and Alarm 2 – press alarm set button (4) during
normal mode and keep depress over 2 seconds to enter alarm set
mode, after enter the setting mode, press alarm set button (4) to
change the mode cycle as follows :
Normal g AL 1 Hour g AL 1 Min g AL 1 weekend Alarm g AL 2 Hour g
AL 2 Min g AL 2 weekend alarm g Normal
Action (during data adjustment) :
- Press << / TEMP / °C / °F button (6) to adjust data backward
- Press >> / Y-M-D / DST button (2) to adjust data forward
- Keep depress << or >> button for 2 seconds to enable auto forward.
8