Abus TVAC19000C User Manual page 23


Motion detection
The settings for motion detection are required for e-mail
notification or push notification as well as for motion-controlled
recording.
Detect mode
Here you can select which mode should be used for the
notifications.
You can choose between Off, PIR or Software.
Off:
No notifications are sent or recordings made if motion is
detected.
Software:
The motion detection occurs via the camera software.
Motion detection
You can make the settings for the motion sensitivity here.
You can choose between "Low" and "High".
Off:
No notifications are sent or recordings made if motion is
detected.
Low:
Motion detection with low sensitivity.
High:
Motion detection with high sensitivity.
The setting for sensitivity is only used in the Software mode.
E-mail setting
The e-mail settings are required for sending a notification.
Use SSL:
Tick the box to transfer the e-mail as encrypted. You receive
the required settings from your e-mail provider.
SMTP server:
Enter the SMTP server address here.
e.g. smtp.test.com
SMTP port:
Enter the SMTP port here.
e.g. 465
Username:
Enter the sender's e-mail address here.
e.g. xxx@test.com
Password:
Enter the password for the sender's e-mail address here.
23
English