Table of Contents
Advertisement
Using the InstantWave Management
System
Once the NWH660 is connected to an Ethernet network, a network administrator can
connect to it from any PC on the same network via the InstantWave Management
System (IWMS) utility.
The IWMS utility is a Windows-based SNMP management tool allowing network
administrators to remotely configure and monitor the NWH660 through both an
Ethernet and a wireless connection. To launch the IWMS utility:
step 1.
Click Start/Programs/InstantWave/Management System/InstantWave
Management System. The main IWMS window will open. Click
Start/Start Hosts View.
Auto-Discovery
This discovery protocol can discover all InstantWave wireless operating devices
connected to the Ethernet LAN within the same subnet.
step 1.
Click the Auto Discovery icon (a pair of binoculars) on the left side of the
Hosts View window. All working InstantWave devices will automatically
be discovered (Figure 24).
InstantWave
11-Mbps Wireless Access Point
39
Advertisement
Table of Contents
