National Datacomm InstantWave NWH660 User Manual page 11

stations' IP settings as described below; otherwise, Windows may continue
to use the previous IP address instead of executing the auto-IP procedure.
Windows 95/98
step 1.
Click Start/Run, type winipcfg, and click OK. The IP Configuration
dialog box will open.
step 2.
Select the network adapter you use to connect to the NWH660. Click
Release.
step 3.
Click Renew to retrieve new information (IP address, subnet mask, and
default gateway address) from the DHCP server. Click OK to save the
changes and exit the program.
Windows NT 4.0
step 1.
Click Start/Programs/Command Prompt. Type ipconfig /release (with a
space after ipconfig) and press Enter.
step 2.
Type ipconfig /renew (with a space after ipconfig) and press Enter to
retrieve new information (IP address, subnet mask, and default gateway
address) from the DHCP server.
step 3.
Type exit and press Enter.
Windows 2000/XP
step 1.
Click Start/Programs/Accessories/Command Prompt. Type ipconfig
/release (with a space after ipconfig) and press Enter.
step 2.
Type ipconfig /renew (with a space after ipconfig) and press Enter to
retrieve new information (IP address, subnet mask, and default gateway
address) from the DHCP server.
step 3.
Type exit and press Enter.
InstantWave
11-Mbps Wireless Access Point
11