Table of Contents
Advertisement
For the best performance, follow the guidelines below in placing the product:
Place as high as possible, in as open an area as possible
Avoid placing the AP (especially the antenna) close to metal objects (e.g. file
cabinets, metal cubicles, etc.)
Keep APs and stations as far away as possible from microwave ovens (10
meters min. is advisable)
When you have decided on a location, follow the steps below to complete the
installation.
step 1.
Screw the antenna into the back of the AP. Place the AP in the chosen
location.
step 2.
Connect one end of an Ethernet network cable to the UTP port of the AP,
and the other end to an Ethernet hub or switch.
step 3.
Connect the power adapter to the electricity outlet and then to the access
point's DC-In jack.
step 4.
Turn on the AP's power switch.
InstantWave
11-Mbps Wireless Access Point
35
Advertisement
Table of Contents
