IKEA RENGÖRA Manual page 9

ENGLISH
You must adjust the water softener
manually and electronically.
Manual adjustment
1
Electronic adjustment
1. Press the on/off button to activate the
appliance. Make sure that the appli-
ance is in setting mode. Refer to 'SET-
TING AND STARTING A PROGRAMME'.
2. Press and hold function buttons (B) and
(C) at the same time until the indicators
of function buttons (A), (B) and (C) flash.
3. Press function button (A).
• The indicators of function buttons (B)
and (C) go off.
• The indicator of function button (A)
continues to flash.
• Intermittent acoustic signals operate
and the end indicator flashes showing
the setting of the water softener.
– The number of flashes of the end in-
dicator and the number of the
acoustic signals show the level of
the water softener.
Example: 5 acoustic signals and 5
flashes + pause + 5 acoustic signals
and 5 flashes = level 5.
4. Press function button (A) again and
again to change the setting. Each time
you press function button (A) you go to
the next level.
5. Deactivate the appliance to confirm.
2
Turn the water
hardness dial to the
position 1 or 2.
Filling the salt container
Caution! Water and salt can come out
from the salt container when you fill it.
Risk of corrosion. To prevent this, after the
replenishment, start a programme.
1
3
Put 1 litre of water
in the salt container
(only for the first
time).
5
2
4
Put 1 kg of salt in
the salt container.
6
9