How To Delete The Pc Expanion On The List Of Nct-2000-Xp Console - NComputing PC Expanion L100 User Manual

How to delete the serial number
1
Go to <Start> ▶ <All Programs> ▶ <NCT-2000-XP> ▶ <NCT-
2000-XP console>. Go to <Information & Settings> ▶ Select the
<Serial Number>.
2
To delete a serial number, select the serial number to be deleted,
right-click and select <Delete> from the pop-up menu. If the serial
number is in use, you cannot delete the number. You can figure
out whether a serial number is in use or not by checking the
number in the 'Number of Stations' field. If there is no number in
the 'Number of Stations' field, you can delete the serial number.
28. How to delete the PC Expanion on the list of
NCT-2000-XP console
1 Go to <Start> ▶ <All Programs> ▶ <NCT-2000-XP> ▶ <NCT-2000-XP
Console>. Go to <Hardware Settings (LAN/Local)> ▶ <UTMA/UTSA
Devices>. Select the PC Expanion that you would like to delete in the
UTMA/UTSA Devices List.
2
Select a PC Expanion, right-click and select <Delete Device> from the
pop-up menu. You can delete a PC Expanion only when it is not in the
same sub-network or turned off. You can only delete a PC Expanion
whose icon is red. When the icon is blue or green, the < Delete Device >
menu is disabled. NCT-2000-XP console does not refresh the list in real-
time. Press the 'F5' key or the 'Refresh' button on the top of the screen to
refresh the contents of the list.
3
The message window appears. If you click the <Yes> button, the PC
Expanion will be deleted. If you click the <No> button, the PC Expanion
will be not deleted.
8-39