Philips SC1991 User Manual page 21

Problem Possible cause
The adapter/ This is normal.
appliance becomes
warm during
charging.
I have switched on The appliance
the appliance but I has to be reset.
cannot increase or
decrease the light
intensity.
The 'ready to flash' You have not
light does not work properly placed
when I place the the appliance on
appliance on the skin. the skin.
The 'ready to The overheat
flash' light does protection has
not work when been activated.
I place the body
attachment on
my skin, but the
cooling fan works.
The 'ready to The appliance
flash' light lights up needs to be reset.
continuously, but
the appliance does
not produce a
flash when I press
the flash button.
Intensity light The body
1 continues to attachment is not
blink and I cannot placed on the
change the setting. appliance properly.
All intensity lights The appliance
go on alternately. needs to be reset.
Solution
No action required.
To reset the appliance, switch off the appliance and
then switch it on again. If you still cannot adjust the light
intensity, contact the Consumer Care Centre in your country,
your Philips dealer or a Philips service centre.
Place the appliance at a 90° angle onto the skin in such a way
that all 4 sides of the integrated safety system touch the skin.
Then check if the 'ready to flash' light lights up continuously
and press the flash button.
If this does not work, place the appliance on a part of your body
where it is easy to establish full skin contact, for example on your
lower arm.Then check if the 'ready to flash' light works. If the
'ready to flash' light still does not start flashing when you place the
appliance on the skin, contact the Consumer Care Centre in your
country, your Philips dealer or a Philips service centre.
When the overheat protection has been activated, the fan still
works. Do not switch off the appliance and let it cool down for
approx. 15 minutes before you continue to use it. After 5 minutes
the appliance switches off automatically. Then let it cool down for
10 more minutes. If the 'ready to flash' light still does not work when
you place the appliance on the skin, contact the Consumer Care
Centre in your country, your Philips dealer or a Philips service centre.
To reset the appliance, switch off the appliance and switch it
on again. If the 'ready to flash' light lights up continuously, but
the appliance still does not produce a flash when you press
the flash button, contact the Consumer Care Centre in your
country, your Philips dealer or a Philips service centre.
Properly place the body attachment on the appliance.
To reset the appliance, switch off the appliance and switch it
on again. If the intensity lights continue to go on alternately,
contact the Consumer Care Centre in your country, your
Philips dealer or a Philips service centre.
ENGLISH
21 21