Hisense LEDN32K300M User Manual page 8

Getting Started
NOTE
The "Y, PB and PR " connectors on your component devices (PVR or DVD) are
sometimes marked with Y, B-Y and R-Y or Y, CB and CR. (Colors for inputs and
cables must correspond on both devices.)
Connect to devices with HDMI interface
Support digital connections between HDMI - enabled AV devices such as PVR,
DVD, Blu-Ray, AV receiver and digital devices.
Some devices such as PVR or DVD player require HDMI signal to be set to output
in the device's settings.
Please consult your device user manual for instructions.
1. Use an HDMI cable to connect the A/V device's HDMI output jack to the TV's HDMI
jack.
2. Plug the connected devices into the mains socket before switching on the TV .
3. Select the corresponding source from the TV.
TV JACK
HDMI Cable
(not included)
NOTE
The HDMI connector provides both video and audio signals, it's not necessary to
connect the audio cable.
Connecting a PC with VGA Cable
1. Use a VGA cable to connect the PC's VGA output jack to the TV's VGA jack. Use
an audio cable to connect the PC's audio output jack to TV's PC AUDIO IN jack.
2. Plug the connected devices into the mains socket before switching on the TV.
3. Select the corresponding source from the TV.
EXTERNAL DEVICES
DVD Player/Recorder
Set-top box
Equipment with HDMI jacks
9
Getting Started
TV JACK
Audio Cable
(not included)
VGA Cable
(not included)
NOTES
Primarily this unit is intended for use as an LCD TV. If you want to use it as a
monitor, please contact the manufacturer of the PC Video/Graphic's card for further
support. Perfect compatibility is not warranted.
The VGA cable will not be supplied with the product.
We strongly recommend to use VGA cable with 2 cores as shown in the figure.
COAXIAL audio
1. Use a coaxial cable to connect the A/V device's digital audio in jack to the TV's
DIGITAL AUDIO OUT jack.
2. Plug the connected devices into the mains socket before switching on the TV.
3. Select the corresponding source from the TV.
TV JACK
COAXIAL
Coaxial Cable
(not included)
NOTE
When a digital audio system is connected to the DIGITAL AUDIO OUT (COAXIAL)
jack, decrease the volume of both the TV and the system.
Connecting a headphone
Headphones can be connected to the HEADPHONE output on your set. (While the
EXTERNAL DEVICES
Computer
EXTERNAL DEVICES
Audio Amplifi er Powerless Speaker
Bass Speaker
10