Remote Control; Installing Batteries In The Remote Control; Making Connections - Hisense LEDN32K300M User Manual

Getting Started

Remote Control

Installing Batteries in the Remote Control

Change the batteries
1. Slide the back cover to open the battery compartment of the remote control.
2. Insert two AAA size batteries. Make sure to match the (+) and ( - ) ends of the
batteries with the (+) and ( - ) ends indicated in the battery compartment.
3. Close the battery compartment cover.
Gently push and slide Insert the batteries
2
1
NOTES
1. Dispose of your batteries in a designated disposal area. Do not throw the batteries
into a fire.
2. Do not mix battery types or combine used batteries with new ones.
3. Remove depleted batteries immediately to prevent battery acid from leaking into
the battery compartment.
4. If you do not intend to use the remote control for a long time, remove the batteries.
5. Batteries should not be exposed to excessive heat, such as sunshine, heat
registers, or fire.
6. Battery chemicals can cause a rash. If the batteries leak, clean the battery
compartment with a cloth. If chemicals touch your skin, wash immediately.
7. Do not mix old and new batteries.
Gently push and slide
3
5
Getting Started

Making Connections

HEADPHONE USB HDMI1 HDMI2 HDMI3
Item Description
ANT CABLE Connect an antenna or cable TV to this jack.
HDMI (High-Definition Multimedia Interface)provides an
HDMI
uncompressed.Support: 480i\480p\576i\576p\1080i\1080p
Connect to a DVD player, Digital Set-Top-Box, or other A/
V devices with component (YP
COMP
jacks. Component audio Jack share AV IN audio Jack.
Support: 480i\480p\576i\576p\1080i\1080p
Connect to the composite video and audio (L/R) output
AV IN
jacks on external video devices.
VGA
Connect to a PC or other devices with a VGA interface.
PC AUDIO IN
HEADPHONE Connect headphone for private listening.
COAXIAL
Connect to an external digital audio device.
USB
Video , MP3, Jpeg play and software update.
VGA PC AUDIO ANT
P ) video and audio output
B R
6