Smart Desktop - Navman SmartS iCN530 User Manual

13. Smart Desktop
Smart Desktop is used to install maps to your iCN, obtain software updates, manage Custom Points
of Interest (POIs) and install Basemaps.
Microsoft ActiveSync
®
Microsoft ActiveSync is used to establish a connection between your iCN and your computer.
ActiveSync 3.7.1 will be installed on your computer (if it is not already installed) as part of the
installation of Smart Desktop.
Installing Smart Desktop on your
Computer
Important Notes:
• Ensure that Internet Explorer 6 or higher is installed on your computer before you install
Smart Desktop, even if it is not your default browser.
• Windows XP users, ensure that Windows XP Service Pack 1 has been applied before you
®
install Smart Desktop.
1. Close all open programs on your computer.
2. Insert the Smart Application Installer CD into your computer CD drive.
The Smart Desktop installer will start.
• If your computer does not automatically launch the CD, start the installation manually:
Start  Run.
Type D:\Setup Smart for iCN530.exe where "D" is the letter assigned to your CD drive.
Click OK.
3. Follow the screen prompts to install Smart Desktop, including:
• Select your preferred language for Smart Desktop when prompted.
• Review and accept the Licence Agreement for Smart Desktop and Microsoft ActiveSync (if
not already installed on your computer) when prompted.
• Install Microsoft ActiveSync (if not already installed on your computer) when prompted.
• Select a destination folder for Smart Desktop when prompted.
4. When the installation has finished, click Finish.
Smart Desktop will open.
Map Display screen
Map information
®
55
iCN 530 | User Manual
Desktop and
iCN tabs
Selected maps
Download selected
maps to the memory
card or memory
card reader (not
supplied)
Map Colour Key