Navman iCN 620 User Manual page 91

NAVMAN iCN 620 user manual
4
Press ESC at any
time to return to
the automatic Map
Browser screen.
If you don’t want 5
to use the Map
Browser screen
to select your 6
destination, use
7
one of the other
methods described
8
in Section 7 Setting
Your Destination.
9
10
11
12
Press OK to display gridlines – you are now in the manual Map Browser screen.
Use the 8-way toggle button
require. When the gridlines are over a street, the street name is shown along the bottom of the screen.
Press OK to select the location. The address details are automatically displayed.
Select START to program this location as your departure point.
You are then returned to the Map Browser screen. Press OK to display gridlines.
Again, use the gridlines to select the DESTINATION point that you require.
Press OK to select the location. The address details are automatically displayed.
Select GO to start the auto simulator.
To stop the auto simulator, press MENU/Power
to position the intersection of the gridlines over the DEPARTURE point that you
to return to the Main Menu. Select CANCEL ROUTE.
91