Page 1: User Manual
USER MANUAL series with SmartS™ 2006 English - Australia/Canada/United States...
Page 3 iCN 700 series User Manual English – Australia / Canada / United States...
Page 4 © 2006 Brunswick New Technologies Asia Pte Limited. Navman is a registered trademark of Brunswick New Technologies Asia Pte Limited and is used under licence by Navman New Zealand. Navman is part of the Brunswick Group, headquarters Chicago, IL. All rights reserved.
Page 5: Important Safety Information
Important safety information PLEASE READ CAREFULLY BEFORE INSTALLING PRODUCT IN VEHICLE This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Page 6 Failure to adhere to these warnings and cautions may lead to death, serious injury or property damage. Navman disclaims all liability for installation or use of the iCN that causes or contributes to death, injury or property damage or that violates any law.
Page 7: Table Of Contents
Contents Important safety information...5 Welcome...9 Box contents ...10 Typographical conventions ...11 Getting to know your iCN ...12 Front components...12 Side components...13 Top components...14 Bottom components...14 Back components ...15 Volume ...15 Internal battery...16 How do I get started?...17 How do I turn my iCN off? ...19 What are the main screens that I will use?...20 How do I navigate with GPS? ...22 How do I go from A to B? ...23...
Page 8 iCN 700 series | Contents How do I save, e-mail or print photos?...65 Via Memory Card...65 Via USB cable ...65 How do I navigate to a photo location? ...67 How do I assign a photo to a Favorite? ...68 What else can I do? ...69 How do I navigate to a recent location? ...70 How do I use the Map Menu? ...71 How do I avoid an area? ...73...
Page 9: Welcome
700 series | Welcome Welcome Thank you for purchasing this Navman iCN. This user manual has been prepared to guide you through the operation of your Navman iCN from first set-up through to continuous use, and will help you Drive-Away™ with your iCN, straight out of the box.
Page 10: Box Contents
700 series | Welcome Box contents Item iCN with GPS receiver AC Power pack with power cable and plugs The number of plugs included depends on the country of purchase. USB cable User Manual GPS Frequently Asked Questions guide...
Page 11: Typographical Conventions
Typographical conventions It is important to understand the terms and typographical conventions used in this manual. Formatting The following kinds of formatting in the text identify special information: Convention Type of Information Bold iCN components or items displayed on screen, including buttons, headings, field names and options.
Page 12: Getting To Know Your Icn
iCN 700 series | Welcome Getting to know your iCN We recommend that you familiarize yourself with the iCN's basic operations. Front components Component Battery indicator Touch screen Description Indicates the level of internal battery charge: Green - battery full - battery low Orange - battery charging...
Page 13: Side Components
Side components Component External antenna socket Volume control Description Connection socket for GPS MCX External Antenna (not included). Connection socket for headphones or earphones (not included). Slot for memory card. The memory card must be inserted with the label facing the front of the iCN.
Page 14: Top Components
iCN 700 series | Welcome Top components Component Bottom components Component RESET BATTERY Hot shoe plate Description Turns the iCN on or off; when off, the iCN enters a suspended state. Turns the camera on. Press to take a photo. Description Resets the iCN.
Page 15: Back Components
Component Camera Speaker GPS receiver Volume The volume on your iCN can be adjusted either by the volume control on the iCN or by using the three volume control buttons on the remote control (may be sold separately). These are described below: Volume Control on iCN To hear a sound test and adjust the volume, rotate the Volume control up or down.
Page 16: Internal Battery
iCN 700 series | Welcome Internal battery The iCN has an internal battery that, when fully charged, should power the iCN for up to 2.5 hours. The battery indicator light on the front of the iCN indicates the level of internal battery charge: Green - battery full - battery low...
Page 17: How Do I Get Started
GPS receiver is facing the sky directly above it, to allow it to obtain a GPS fix through the windshield. the BATTERY switch is ON.
Page 18 iCN 700 series | How do I get started? 2. Select your preferred language From the Language screen, tap your preferred language. To prevent the Language screen from displaying on each startup, tap the Show on startup check box. You can change your preferred language while using your iCN. For more information, see "Language" on page 103.
Page 19: How Do I Turn My Icn Off
How do I turn my iCN off? To turn your iCN off, press Your iCN will enter a suspended state and the screen will turn off. When you turn your iCN on again, it will return to the screen you were last viewing. Power-saving suspended state To save power, your iCN will automatically enter a suspended state after a pre-determined period of time.
Page 20: What Are The Main Screens That I Will Use
iCN 700 series | What are the main screens that I will use? What are the main screens that I will use? Map screens There are four map screens used to view the route to your destination: 3D Map 2D Map Next Turn Direction List To display the 3D Map screen, or the map screen that you were last viewing, press...
Page 21 iCN 700 series | What are the main screens that I will use? Go To Menu screen The Go To Menu screen is your starting point for specifying a destination. From the Go To Menu screen you can navigate to My Home, an address, Point of Interest, Favorite, recent location or set a multi-stop trip. To access the Go To Menu at any time, press , or tap from the Main Menu screen;...
Page 22: How Do I Navigate With Gps
GPS receivers, such as your iCN, to determine an exact location. Although a GPS receiver can detect signals from up to 12 satellites at any time, only four signals are required to provide a position or "GPS fix"...
Page 23: How Do I Go From A To B
How do I go from A to B? Your iCN is equipped with maps that provide street-level detail for door-to-door navigation, including Points of Interest (POIs) such as accommodation, parking areas, gas stations, railway stations and airports. When you ... know the address of your destination have multiple stops need to find a named site, feature, landmark...
Page 24: How Do I Search For An Address
iCN 700 series | How do I go from A to B? How do I search for an address? Select a destination using the Destination Search, Keyboard and Destination Preview screens, which used together form an address-entry wizard. This section describes how to use each of these screens and provides a case study to help guide you through setting your destination.
Page 25 2. Select the country and state If this is the first time you are setting your destination and you have maps from only one country, but more than one state installed and selected, then the Select State screen will display instead of the Destination Search screen. The next time you perform this procedure, the Destination Search screen will open as expected.
Page 26 iCN 700 series | How do I go from A to B? 3. Search for the city/area From the Destination Search screen, tap City/Area. The Keyboard screen will display. Use the Keyboard screen to search for the city or area of your destination. The Destination Search screen will display.
Page 27: Using The Keyboard Screen
Using the Keyboard screen The Keyboard screen will display when you are required to enter text, such as when searching for a street name. As you tap each character, the first two matching results will display. Tap results. Search results will be listed in matching order, with the closest matches appearing at the top of the list.
Page 28 iCN 700 series | How do I go from A to B? Use the Keyboard screen to search for the street of your destination. Where there are multiple matches, select the city or area that best describes your destination. The Destination Search screen will display. If house numbers and intersection information are not available for your selected street, the Destination Preview screen will display.
Page 29 Complete one of the following: Please ensure that the route preferences are applicable for the route that you have specified, before you tap Go. If you want to ... calculate the route and open the 3D Map screen select a more precise location by pointing display the geographical details save the destination as My Home save the destination as a Favorite...
Page 30: How Do I Create A Trip With Multiple Stops
iCN 700 series | How do I go from A to B? How do I create a trip with multiple stops? You can use the Multi-stop Trip Planner screen to set multiple waypoints for your trip. Your route will be calculated to go via each of these points in the specified order.
Page 31: Case Study: How Do I Navigate To Multiple Addresses
Case Study: How do I navigate to multiple addresses? This case study will show you how to set a multi-stop trip by selecting your country, then state, then town or city, then street, then house number for each waypoint. 1. Start your multi-stop trip The Multi-stop Trip Planner screen will display.
Page 32 iCN 700 series | How do I go from A to B? 2. Select the country and state If this is the first time you are setting your destination and you have maps from only one country, but more than one state installed and selected, then the Select State screen will display instead of the Destination Search screen.
Page 33 3. Search for the city/area From the Destination Search screen, tap City/Area. The Keyboard screen will display. Use the Keyboard screen to search for the city or area of your destination. The Destination Search screen will display. 4. Search for the street From the Destination Search screen, tap Street.
Page 34 iCN 700 series | How do I go from A to B? Use the Keyboard screen to search for the street of your destination. The Destination Search screen will display. If house numbers and intersection information are not available for your selected street, the Waypoint Preview screen will display.
Page 35 Tap Add. The destination is automatically saved and the Multi-Stop-Trip Planner screen will display. Complete one or more of the following: If you want to ... add another waypoint Waypoints added after a multi-stop trip has commenced will not be included in the current route.
Page 36: How Do I Skip A Waypoint During A Multi-Stop Trip
iCN 700 series | How do I go from A to B? How do I skip a waypoint during a multi- stop trip? You can modify a multi-stop trip at any time from the Multi-stop Trip Planner screen, however if you have already commenced a trip, changes will not affect the current route: To skip a waypoint during a multi-stop trip, complete the following: Tap the map to display the cross-hairs.
Page 37: How Do I Search For A Landmark Or Venue
How do I search for a landmark or venue? Setting a Point of Interest (POI) as your destination A POI is a named site, feature, landmark or public venue which can be displayed as an icon on the map. POIs are grouped by type, such as gas stations, parks and museums.
Page 38: How Do I Find The Nearest Parking Area
iCN 700 series | How do I go from A to B? How do I find the nearest parking area? You can press to quickly find the nearest parking area. This case study will show you how to set your destination by locating and selecting a parking area Point of Interest (POI).
Page 39: How Do I Search For Other Pois
How do I search for other POIs? Select a POI destination using the Destination Search, Keyboard and Destination Preview screens, which used together form a POI-entry wizard. This section describes how to use each of these screens and provides a case study to help guide you through setting your POI.
Page 40 iCN 700 series | How do I go from A to B? 2. Select the country and state If this is the first time you are setting your destination and you have maps from only one country, but more than one state installed and selected, then the Select State screen will display instead of the Destination Search screen.
Page 41 3. Select the type of POI To narrow the search for a type of POI, you can first search by Area. From the Destination screen, tap Point of Interest. The Select POI screen will display. Select a POI type from the list. The Keyboard screen will display.
Page 42 iCN 700 series | How do I go from A to B? Complete one of the following: Please ensure that the route preferences are applicable for the route that you have specified, before you tap Go. If you want to ... calculate the route and open the 3D Map screen select a more precise location by pointing...
Page 43: How Do I View My Route
iCN 700 series | How do I view my route? How do I view my route? Once a route has been calculated, the 3D Map screen will display. You will be directed to your destination by vocal and visual instructions. You can view your route in several ways by pressing to cycle through the map screens.
Page 44: Map Screen
iCN 700 series | How do I view my route? 3D Map screen The 3D Map screen is oriented to your travelling direction. To view the 3D Map screen when a route has been calculated, press Tap and drag the screen, to move across the map. Tap and hold the map, to view Map menu.
Page 45 Item Description Information Displays one of the following options: Tap to cycle through the options. Route Your current route is highlighted. Cancel route Cancels your current route Zoom To view zoom options, tap Compass and GPS Displays one of the following options: information Tap to cycle through the options;...
Page 46: Map Screen
iCN 700 series | How do I view my route? 2D Map screen The 2D Map screen shows your current position (if a GPS fix is active) and surrounding street names. If a route has been calculated, the route and turns are highlighted. The 2D Map screen is displayed Course Up, unless the Map Display preferences are set to North.
Page 47 Item Description Information Displays one of the following options: Tap to cycle through the options. Route Your current route is highlighted. Cancel route Cancels your current route. Next turn arrow Your next turn is highlighted in a different colour to future turns. The default colour of your next turn is green, but will depend on the colour theme you are using.
Page 48: Next Turn Screen
iCN 700 series | How do I view my route? Next Turn screen The Next Turn screen displays information that you need for the next turn, the direction of the turn and the distance to the turn. A route must first have been calculated, for this screen to be available. To view the Next Turn screen when a route has been calculated, press Item Next instruction...
Page 49: Direction List Screen
Item Map of next turn Current position Compass and GPS Information Direction List screen The Direction List screen displays the next four turns of your route, the turn direction, the street name and the distance to the turn. You can view all the turns in the list, using the scroll bar. A route must first have been calculated for this screen to be available.
Page 50: What If I Miss A Turn
iCN 700 series | How do I view my route? Item Status Bar Information Position Indicator Cancel Route Scroll Bar Compass and GPS Information What if I miss a turn? Back-On-Track™ Automatic Rerouting Your route is re-directed if you make a wrong turn. A message informing you that your route is being re-calculated will display at the top of the screen.
Page 51: How Do I Save Favorites And My Home
How do I save Favorites and My Home? You can save up to 200 destinations as Favorites, one of which can be saved as My Home. My Home can be any designated Favorite, but we recommend that it is your home or other common destination. You can save a Favorite from the Destination Preview screen after searching for an address, or from the Maps Menu on the 3D or 2D Map screens.
Page 52: How Do I Navigate To A Favorite
iCN 700 series | How do I save Favorites and My Home? Complete one of the following: If you want to ... save as a Favorite save as My Home How do I navigate to a Favorite? Tap the Favorite destination you want to travel to. The Favorite Preview screen will display.
Page 53: How Do I Navigate To My Home
How do I navigate to My Home? If you have not set an address as My Home, the first time you try to navigate to My Home you will be prompted to search for an address using the address-entry wizard. Option 1 - From the Go To Menu The route is calculated and displayed on the Map screen.
Page 54: How Do I View Details Of A Favorite
iCN 700 series | How do I save Favorites and My Home? How do I view details of a Favorite? From the My Favorites screen, select a Favorite. The Favorite Preview screen will display. Tap Details. The Favorite Details screen will display. Complete one of the following: If you want to ...
Page 55: How Do I Edit The Name Of A Favorite
How do I edit the name of a Favorite? From the My Favorites screen, select a Favorite to edit. The Favorite Preview screen will display. Tap Edit. The Edit Name screen will display. To edit the name of the Favorite, tap After you have edited the Favorite name, tap OK.
Page 56: How Do I Delete A Favorite
iCN 700 series | How do I save Favorites and My Home? How do I delete a Favorite? From the My Favorites screen, select a Favorite to delete. The Favorite Preview screen will display. Tap Delete. The Favorite is deleted. The My Favorites screen will display.
Page 57: How Do I Use The Camera
How do I use the camera? Your iCN has an inbuilt camera with geographical location on the navigation maps. This enables you to navigate directly to where the photo was taken. Photos can be stored in an Album on the iCN's hard drive or a memory card and viewed in full screen mode. In this section How do I view the Camera screen? ...
Page 58: How Do I View The Camera Screen
iCN 700 series | How do I use the camera? How do I view the Camera screen? The Camera screen allows you to take photos and access the camera preferences. To view the Camera screen, press You can also access the Camera screen from the Main Menu; tap Pressing will not take a photo until you are already in the Camera screen.
Page 59: Gps Fix
How do I take a photo? The Camera screen must be displayed before you can take a photo. To view the Camera screen, press You can also access the Camera screen from the Main Menu; tap When the Camera screen is open, an image of whatever the camera is focused on will display in the Viewfinder.
Page 60: How Do I Customize Camera Preferences
iCN 700 series | How do I use the camera? How do I customize camera preferences? The Camera has lighting and brightness settings which you can customise before taking a photo. Lighting options To view the Camera screen, press From the Camera screen, tap The range of lighting options will display.
Page 61: How Do I Manage My Photos
How do I manage my photos? Album management The Album stores all your photos and displays them as thumbnails. You can store photos in the Album on the iCN's hard drive or on your memory card. When you take a photo, it is always saved to the Album on the iCN's hard drive. Press to view the Camera screen.
Page 62 iCN 700 series | How do I use the camera? How do I copy photos between Albums? Photos can be copied from the Album on the iCN's hard drive to your memory card and vice versa. The first time a photo is copied to your memory card, a folder will be created on the memory card called My Pictures. For more information, see "How do I use a memory card with my iCN?"...
Page 63: Photo Management
Photo management The Photo Details screen displays information about your photo. To display the Photo Details screen, tap any photo in your Album. Element Go to Assign Copy Delete Photo Title Show on Map Photo Scroll Bar Edit Time / Date and Location Co-ordinates iCN 700 series | How do I use the camera? Description...
Page 64 iCN 700 series | How do I use the camera? How do I view a photo in full-screen? From the Photo Details screen, tap the thumbnail of the photo. The photo will appear in full-screen. Complete the following: If you want to ... zoom into the photo zoom out of the photo rotate the photo...
Page 65: How Do I Save, E-Mail Or Print Photos
How do I save, e-mail or print photos? To save, e-mail or print photos, you must first transfer the photos to your computer; there are two ways to do this: Copy the photos from a memory card to your computer via a memory card reader or memory card drive, or Copy the photos directly from your iCN to your computer via the enclosed USB cable.
Page 66 iCN 700 series | How do I use the camera? Select your preferred language for Smart Click Install Microsoft ActiveSync and follow the screen prompts. How do I copy photos from my iCN to my computer via the USB cable? CAUTION Ensure that Microsoft ActiveSync is installed on your computer before connecting the USB cable to your computer.
Page 67: How Do I Navigate To A Photo Location
How do I navigate to a photo location? To navigate to a photo location, a GPS fix must have been available when the photo was taken. From the Album screen, tap a photo. The Photo Details screen will display. From the Photo Details screen, tap Go to. The Destination Preview screen will display.
Page 68: How Do I Assign A Photo To A Favorite
iCN 700 series | How do I use the camera? How do I assign a photo to a Favorite? When a photo is assigned to an existing Favorite, only the image, and not the image co-ordinates, are associated with the Favorite. From the Album screen, tap a photo.
Page 69: What Else Can I Do
What else can I do? When you want to... view your recent locations calculate a route that avoids a specified area on the map preview your route, or plan and view a route without a GPS fix view statistical information on both your current trip and all trips to date WARNING For your safety, enter destination information before you start a journey.
Page 70: How Do I Navigate To A Recent Location
iCN 700 series | What else can I do? How do I navigate to a recent location? To make navigating to an address easier, your iCN will automatically save all of your start locations and destinations in a list of recent locations. Tap a recent location.
Page 71: Map Menu Options
If you want to ... change your destination How do I use the Map Menu? The Map Menu allows you to access navigational functions from the 3D Map and 2D Map screen. Displaying the Map Menu to display the 3D Map or 2D Map screen. Tap and drag to move around the map to your selected location.
Page 72 iCN 700 series | What else can I do? Menu Option Location Route Add Avoid Area Delete Avoid Area Description Only available when the selected location is near a road. Displays the Location sub-menu from which you can: Add To Favorites. Displays the New Favorite screen for you to add the location as a favorite.
Page 73: How Do I Delete All Avoid Areas
How do I avoid an area? Your iCN can calculate a route that avoids a specified area on the map. Up to ten Avoid Areas can be added. Avoid Areas are displayed as shaded areas. CAUTION If no alternative route around an Avoid Area exists, the route calculation will fail. CAUTION If your destination is in an Avoid Area, you will be routed into that Avoid Area.
Page 74: How Do I Preview A Route
iCN 700 series | What else can I do? How do I preview a route? Route demonstration allows you to: Preview a route. Plan and view a route without a GPS fix, such as when you are inside a building. The following steps will show you how to preview one route.
Page 75 2. Select a destination point Set a destination either by using the address entry wizard or by using the Maps (see below): Locate your destination. Tap and hold your destination to display the Map menu. Select Navigate To. The Map menu will close and the map screen will display the calculated route. 3.
Page 76: How Do I View My Route Statistics
iCN 700 series | What else can I do? How do I view my route statistics? The iCN provides information on your: distance travelled average speed maximum speed time taken for trip stationary time. Trip information is presented in two different ways. These are: information for the current trip information for all trips to date, or since the tripmeter was last reset.
Page 77: How Do I View Statistics Of My Trips To Date
How do I view statistics of my trips to date? The Tripmeter - Global screen is used to view statistical information for all of your trips to date, or since the trip meter was last reset. The Tripmeter - Current Route screen will only display when there is a current route selected. If there is no route selected, the Tripmeter - Global screen will display as a default.
Page 78: What Is Smartst Desktop
iCN 700 series | What is SmartST Desktop? What is SmartST Desktop? Smart Desktop is software for your PC computer and is used to install maps to your iCN. You can also use it to remove maps from your iCN, obtain software updates, manage Custom Points of Interest (POIs) and install Basemaps.
Page 79: Can I Use Smart Desktop With My Computer
Can I use Smart computer? Ensure you have the following minimum system requirements before installing Smart IBM compatible PC, ® ® Microsoft Windows 2000 or XP SP1 (NT not supported), Internet Explorer 6 or higher, CD drive, USB port, Internet connection for registration. You must install Smart Desktop from the Application Installer CD onto your computer hard drive;...
Page 80: How Do I Install Smart Desktop On My Computer
iCN 700 series | What is SmartST Desktop? How do I install Smart Desktop on my computer? Before you Begin: Ensure that your computer meets the minimum system requirements for Smart i. Ensure that Internet Explorer 6 or higher is installed on your computer before you install Smart it is not your default browser.
Page 81: Smart Desktop Features
Once Smart Desktop has been installed on your computer, you can access it from the Windows Start menu: Start > All Programs > Navman > SmartST Desktop 2006 iCN 700 series | What is SmartST Desktop? Desktop to install maps to your iCN.
Page 82 CD, on a CD that came with the current CD, installed on your iCN or memory card, or available from Navman. The following information will display when you point to a map: Map name File size (if the map is on the inserted CD or a CD in the same...
Page 83: Toolbars
Toolbars The following toolbars are available in Smart Toolbar Button Status Globe Cursor Moving a toolbar A toolbar is either docked in the gray area at the top of the screen, or floating on the screen. To float a toolbar, click the portion of the toolbar to the left of the buttons and drag it to anywhere on the screen. To dock a toolbar, either double-click the top of a floating toolbar, or click and drag the toolbar back to the gray area at the top of the screen.
Page 84: How Do I Keep Smart Up-To-Date
Updating vs. Upgrading Updating software is different from upgrading software: When you update Smart , the latest service packs and bug fixes are downloaded from Navman and applied to your iCN. To upgrade Smart , you must first purchase a new version of Smart How do I update Smart If you connect to the Internet via a dial-up connection, connect to the Internet now.
Page 85: How Do I Install Maps On My Icn
How do I install maps from CD? Open Smart Desktop, if it is not already open: Start > All Programs > Navman > SmartST Desktop 2006 Insert a Smart Map CD into your computer CD drive. The preactivated maps that are ready to be installed to your iCN are The maps on the CD that require activation before being installed to your iCN are If your computer opens Windows Explorer when the CD is inserted, close the Windows Explorer window.
Page 86 iCN 700 series | What is SmartST Desktop? Complete the following: If the map to be installed is ... light green light blue If you connect to the Internet via a dial-up connection, connect to the Internet now. Follow the prompts to activate your Map Product Key, including: Enter the Map Product Key from the back of the enclosed CD box when prompted.
Page 87 How do I remove maps from my iCN? Open Smart Desktop, if it is not already open: Start > All Programs > Navman > SmartST Desktop 2006 Click the View/Remove Tabs tab. The View/Remove tab will open, displaying a list of installed maps.
Page 88: How Do I Know Which Map Contains A Particular City Or Town
iCN 700 series | What is SmartST Desktop? How do I know which map contains a particular city or town? Use the Find City window to find the map that contains a particular city or town. On the Map menu, select Find City. The Find City window will open.
Page 89: What Is A Major Road Network Map
What is a Major Road Network map? Continuous continental navigation Major Road Network maps allow you to seamlessly navigate between installed maps without installing maps of all regions along your route. Each Major Road Network map covers a large area, such as Western Europe or Canada and the United States (continental), and contains main roads that connect cities and towns.
Page 90: How Do I Install Custom Points Of Interest
"POI Alerts" on page 109. Navman is not responsible for the content or accuracy of the information or the reliability or availability of these websites.The use of information regarding safety camera locations may be subject to local laws in the country of use. You are responsible for checking that you can use the information in your country or in the country where the information will be used.
Page 91: How Do I Create A Custom Poi File
How do I create a Custom POI file? Complete the following steps to create or edit a custom POI file containing the latitude and longitude of individual POIs. The file will be saved on your computer in .csv (Comma Separated Values) format. When you have finished creating or editing the file, you can copy it to your iCN.
Page 92: How Do I Copy A Custom Poi File To My Icn
iCN 700 series | How do I install Custom Points of Interest? If you know ... the decimal degrees of the POI Click OK to save the POI. Repeat step 2 until all POIs have been added to the POI file. Click The POI file is saved.
Page 93 Modify the POI settings as required: If you want to... edit the POI category name activate the POI to enable proximity warnings enable a visual warning when a POI of this category is in close proximity enable a warning sound when a POI of this category is in close proximity change the units used to measure distance for this POI category...
Page 94 iCN 700 series | How do I install Custom Points of Interest? How do I add sound files to My Sounds Admin? My Sounds Admin is used to compile a list of sound files for you to select an audible alert from when editing the POI file options.
Page 95: How Do I Delete A Backup
How do I backup my iCN? You can save backups of the following information, and later restore them to your iCN: Favorites and My Home Preferences, including Point of Interest and photo preferences Multi-stop trips Recent locations. How do I Backup my iCN? On the File menu, select Backup.
Page 96: Reference
iCN 700 series | Reference Reference In this section What can I customize? ... 97 Which maps are already installed on my iCN?... 111 How do I use a memory card with my iCN? ... 112 Street types - US ... 114 Street types - Canada...
Page 97: What Can I Customize
What can I customize? There are a number of different customization options available to enhance your navigation experience. The Preferences menu is shown below, and is accessed by pressing the Element Description Options to control aspects of your route; for example, indicating a preference for freeways.
Page 98: Route Preferences
iCN 700 series | Reference Route Preferences You can enhance your navigation experience by modifying aspects of your route and route calculation. The first route preference screen is the Route Calculation screen, and is accessed by tapping Preferences menu. Tap to display the other route preference screens.
Page 99: Road Types
Road Types Complete the following: If you want to... avoid toll roads receive a warning if your route includes toll roads avoid unsealed roads receive a warning if your route includes unsealed roads avoid ferry routes receive a warning if your route includes ferry routes Your preferences are automatically saved.
Page 100 SmartST shop demonstration check box. After a 10- second delay, the route demonstration will navigate between your first and second Favorite. contact Navman Customer Support, as we recommend this feature be used only under the supervision of a Navman technician.
Page 101: Tutorial
Tutorial The Tutorial displays when you turn your iCN on, unless you have cleared the Show on start-up check box. You can view the Tutorial at any other time: To prevent the Tutorial from displaying again on startup, tap the Show on start-up check box to clear it. To move forward through the Tutorial screens, tap To revisit the previous screen, tap When you have finished the Tutorial, the Preferences menu will display.
Page 102: Resetting Your Gps Fix
iCN 700 series | Reference Screen Display For further information, see "Screen Display" on page 106. GPS Status Signals are transmitted by Global Positioning System (GPS) satellites orbiting the Earth. The GPS Status screen provides a visual representation of the information being received. Latitude and longitude are displayed, along with ground speed, the heading in degrees and a north-pointing compass.
Page 103 Power The Battery Status bar shows the percentage of power left in the iCN battery; the word Charging will display when the battery is charging from an external power source. To charge the battery, see "Internal battery" on page 16. Complete the following: If you want to...
Page 104: Saved Information
iCN 700 series | Reference Complete the following: If you want to... change the on-screen language enable voice guidance instructions while driving to your destination change the voice scheme Your preferences are automatically saved. to return to the previous screen. Saved Information Complete the following: If you want to...
Page 105: Display Preferences
Start-up Complete the following: If you want to... show the Tutorial when you turn on your iCN show the Language Selection screen when you turn on your iCN Your preferences are automatically saved. to return to the previous screen. Display Preferences You can enhance your navigation experience by modifying aspects of the way that your iCN displays information.
Page 106 iCN 700 series | Reference Element Description Options to control measurement of time, position and distance. Screen Display Complete the following: If you want to... change the screen brightness align the touch screen Your preferences are automatically saved. to return to the previous screen. Then...
Page 107: Map Display
Map Display Complete the following: If you want to... change the color scheme improve screen contrast in light or dark conditions enable automatic zooming during navigation display North at the top of the 2D Map screen display “no entry” icons on “no entry”...
Page 108: Poi Preferences
iCN 700 series | Reference Complete the following: If you want to... change the Position Format change the local time offset change the distance units Your preferences are automatically saved. to return to the previous screen. POI Preferences You can enhance your navigation experience by modifying aspects of the way that your iCN displays and manages POIs.
Page 109: Poi Alerts
POI Alerts The POI Alert preferences allow you to set warning chimes and visual warnings for custom POI categories that will activate within a chosen distance-radius of your location. For example, a warning chime will sound or a visual warning will display when an active POI is in the vicinity (set by the Warning Distance preferences), but not necessarily on your route.
Page 110 iCN 700 series | Reference How do I enable Points of Interest? Points of Interest (POI) in a region are grouped into categories. You may either choose to display (or hide) icons of all POI categories on the map screens, or to selectively display desired icons chosen from the list of POI categories. For example, you may be only interested in entertainment venues and want to disable other POI categories such as schools.
Page 111: Which Maps Are Already Installed On My Icn
Which maps are already installed on my iCN? Region of Model Purchase Australia or iCN 750 New Zealand Canada and iCN 750 United States Western Europe, including iCN 720 the United Kingdom iCN 750 iCN 700 series | Reference Description Preactivated maps of Australia or New Zealand are preinstalled on your iCN.
Page 112: Map Storage
iCN 700 series | Reference How do I use a memory card with my iCN? Your iCN has a memory card slot ( ) for an SD or MMC memory card (not included) that can be used for storing maps or photos. Map Storage If there is not enough space in your iCN internal memory for a required map, you can install maps to your memory card using Smart...
Page 113: How Do I Insert A Memory Card
iCN 700 series | Reference How do I insert a Memory Card? Holding the card by the edges, gently insert it into the slot with the label facing the front of the iCN. CAUTION Do not to apply pressure to the center of the memory card. How do I remove a Memory Card? Before removing the memory card, turn off the iCN.
Page 114: Street Types - Us
iCN 700 series | Reference Street types - US Country United States of America Street Type ALLEY ANNEX ARCADE AVENUE BAYOU BEACH BEND BLUFF BLUFFS BOTTOM BOULEVARD BRANCH BRIDGE BROOK BROOKS BURG BURGS BY-PASS CAMP CANYON CAPE CAUSEWAY CENTER CENTERS CIRCLE CIRCLES CLIFF...
Page 115 Country United States of America Street Type DALE DIVIDE DRIVE DRIVES ESTATE ESTATES EXPRESSWAY EXTENSION EXTENSIONS FALLS FERRY FIELD FIELDS FLATS FORD FORDS FOREST FORGE FORGES FORK FORKS FORT FREEWAY GARDEN GARDENS GATEWAY GLEN GLENS GREEN GREENS GROVE GROVES HARBOR HARBORS HAVEN HEIGHTS...
Page 116 iCN 700 series | Reference Country United States of America Street Type KEYS KNOLL KNOLLS LAKE LAKES LANDING LANE LIGHT LIGHTS LOAF LOCK LOCKS LODGE LOOP MANOR MANORS MARKET MEADOW MEADOWS MILL MILLS MISSION MOTORWAY MOUNT MOUNTAIN MOUNTAINS NECK ORCHARD OVAL OVERPASS PARK...
Page 117 Country United States of America Street Type PRAIRIE RADIAL RAMP RANCH RIDGE RIDGES RIVER ROAD ROADS ROUTE SHOAL SHOALS SHORE SHORES SKYWAY SPRING SPRINGS SPUR SPURS SQUARE SQUARES STATION STRAVENUE STREAM STREET STREETS SUMMIT TERRACE THROUGHWAY TRACE TRACK TRAFFICWAY TRAIL TUNNEL TURNPIKE UNDERPASS...
Page 118: Street Types - Canada
iCN 700 series | Reference Country United States of America Street types - Canada Country Canada Street Type WALK WALKS WALL WAYS WELL WELLS Street Type ABBEY ACRES ALLEE ALLEY AUTOROUTE AVENUE (English) AVENUE (French) BEACH BEND BOULEVARD (English) BOULEVARD (French) BY-PASS BYWAY CAMPUS...
Page 119 Country Canada Street Type CUL-DE-SAC DALE DELL DIVERSION DRIVE ÉCHANGEUR ESPLANADE ESTATES EXPRESSWAY EXTENSION FARM FIELD FOREST FREEWAY FRONT GARDENS GATE GLADE GLEN GREEN GROUNDS GROVE HARBOUR HEIGHTS HIGHLANDS HIGHWAY HILL HOLLOW ÎLE IMPASSE ISLAND KNOLL LANDING LANE LIMITS LINE LINK LOOKOUT LOOP...
Page 120 iCN 700 series | Reference Country Canada Street Type ORCHARD PARADE PARC PARK PARKWAY PASSAGE PATH PATHWAY PINES PLACE (English) PLACE (French) PLATEAU PLAZA POINT PORT PRIVATE PROMENADE QUAY RANG RANGE RIDGE RISE ROAD ROND POINT ROUTE RUELLE SENTIER SQUARE STREET SUBDIVISION TERRACE...
Page 121 Country Canada Street Type WALK WHARF WOOD WYND iCN 700 series | Reference Abbreviation WALK WHARF WOOD WYND...
Page 122: Points Of Interest Categories
iCN 700 series | Reference Points of Interest categories Icon Description Airline Access Amusement Park Bank Boat Ramp Building Car Dealer Cash Dispenser Centre of Settlement Cinema College or University Concert Hall, Music Center, Opera Courthouse Dentist Drive-Through Bottle Shop Emergency Medical Service Fire Station General POI...
Page 123 Icon Description Pharmacy Police Station Railway Station Rest Area Scenic or Panoramic View Shop Stadium Tennis Court Tourist Information Office Vehicle Equipment Provider Water Sports Yacht Basin iCN 700 series | Reference Icon Description Place of Worship Post Office Rent-a car Parking Restaurant Area School Shopping Centre...
Page 124: Specifications
iCN 700 series | Reference Specifications Specifications General Operating voltage: DC5V Operating voltage range: DC10.8–16.0V Maximum operation current: 2.5A Grounding system: car battery negative pole AC adapter Operating voltage range: AC85-265V Maximum operation current: 2.5A Car adapter Operating voltage: DC12V Operating voltage range: DC8–24V Maximum operation current: 2.5A TFT monitor...
Page 125: Support Information
Support information Support for Australia Navman Australia Pty Ltd PO Box 479 Gladesville, NSW 2111 Australia Support: http://support.navman.com Website: http://www.navman.com Support for New Zealand Navman New Zealand PO Box 68-155 Newton Auckland New Zealand Support: http://support.navman.com Website: http://www.navman.com iCN 700 series | Support information...
Page 126: Notes
iCN 700 series | Notes Notes...
Page 128 MN000538A-G...

Navman iCN-700 Series User Manual

Quick Links

USER MANUAL

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Navman iCN-700 Series

Summary of Contents for Navman iCN-700 Series

Table of Contents