Navman iCN 620 User Manual page 61

NAVMAN iCN 620 user manual
Press ESC at any
5
time to remove
the gridlines, and
again to return to
6
the automatic Map
Browser screen.
Note: the START
option will only be
available if
the unit does not
7
have a current
•
GPS fi x.
•
•
Use the 8-way toggle button
When the gridlines are over a street, the street name is shown along the bottom of the screen.
Press OK to select a point as your destination. The address details are automatically displayed.
Choose one of the following:
Select GO. The unit will calculate the route and display the destination on the navigation screen.
Select START. This sets your chosen location as your departure point (normally your departure point is assumed
to be your present location). Refer to the following section Without a GPS Position Fix for more information.
Select SAVE. This will allow you to save the destination as a Shortcut or Favourite. Refer to Section 9/10
Programming Shortcuts/Favourites for more information.
to position the intersection of the gridlines over the destination that you require.
61