Replacing Light Bulbs; Care & Cleaning Tips - Frigidaire GLVC 25V7 Use & Care Manual

• Never use metallic scouring pads, brushes, abrasive cleaners or
strong alkaline solutions on any surface.
• Do not wash any removable parts in a dishwasher.
• Always unplug the electrical power cord from the wall outlet
before cleaning.
Note
If you set your temperature controls to turn off cooling, power to
lights and other electrical components continues until you
unplug the power cord from the wall outlet.
• Remove adhesive labels by hand. Do not use razor blades or
other sharp instruments which can scratch the appliance surface.
• Do not remove the serial plate.
Caution
Pull the refrigerator straight out to move it. Shifting it from
•
side to side may damage flooring. Be careful not to move the
refrigerator beyond the plumbing connections.
Damp objects stick to cold metal surfaces. Do not touch
•
refrigerated surfaces with wet or damp hands.
Important
If you store or move your refrigerator in freezing temperatures,
be sure to completely drain the water supply system. Failure to
do so could result in water leaks when the refrigerator is put
back into service. Contact a service representative to perform
this operation.
Care & Cleaning Tips
Part Cleaning Agents Tips and Precautions
• Soap and water
Interior & Door
Liners
• Baking soda and
water
• Soap and water • Wipe gaskets with a clean soft
Door Gaskets
Drawers & Bins • Soap and water • Use a soft cloth to clean drawer
Glass Shelves • Soap and water
• Glass cleaner
• Mild liquid sprays
• Soap and water
Toe Grille
• Mild liquid sprays
• Vacuum
attachment
Downloaded from Fridge-Manual.com Manuals
• Use 2 tablespoons of baking soda
in 1 quart of warm water.
• Be sure to wring excess water out
of sponge or cloth before cleaning
around controls, light bulb or any
electrical part.
cloth.
runners and tracks.
• Do not wash any removable items
(bins, drawers, etc.) in dishwasher.
• Allow glass to warm to room
temperature before immersing in
warm water.
• Vacuum dust from front of toe
grille.
• Remove toe grille (see Installation
Instructions.).
• Vacuum backside and wipe with
sudsy cloth or sponge. Rinse and
dry.
Part Cleaning Agents Tips and Precautions
• Soap and water
Exterior &
Handles
• Non Abrasive
Glass Cleaner
• Soap and water
Exterior &
Handles
• Ammonia
(Stainless
• Stainless Steel
Steel Models
Cleaners
Only)

Replacing Light Bulbs

Both the freezer and fresh food compartments of your refrigerator
include light bulbs that will need replacing from time to time. Some
lights have covers that you will need to remove before replacing the
bulbs. Always use bulbs that are designed for appliance lighting.
Caution
Wear gloves when replacing light bulbs to avoid getting cut.
To replace light bulbs:
Unplug your refrigerator's power cord.
1
Wear gloves as protection against possible broken glass.
2
Remove light cover, if necessary.
3
Unscrew and replace old bulb with an appliance bulb of the same
4
type and wattage (normally 40 watts).
Replace light cover, if necessary.
5
Plug in the refrigerator's power cord.
6
14
• Do not use commercial household
cleaners, ammonia, or alcohol to
clean handles.
• Use a soft cloth to clean smooth
handles.
• Do not use a dry cloth to clean
smooth doors.
• Clean stainless steel front and
handles with non-abrasive soapy
water and a dishcloth. Rinse with
clean water and a soft cloth.
• Wipe stubborn spots with an
ammonia-soaked paper towel, and
rinse. Use a non-abrasive stainless
steel cleaner. These cleaners can
be purchased at most home
improvement or major department
stores. Always follow
manufacturer's instruction.
Note Always, clean, wipe and dry
with grain to prevent scratching.
• Wash the rest of the cabinet with
warm water and mild liquid
detergent. Rinse well, and wipe dry
with a clean soft cloth.