Maintenance - Arrow ET2025 Manual

ACCESSORIES
ROUND
CROWN
STAPLES
For wire & cable
installation, use
wire attachment
with round
crown
staples.
Guide Light.
Your ET2025™ comes equipped with a guide light at the front of the tool figure 1.
The light will be activated upon pressing the trigger. Your ET2025™ has a safety switch at the staple/nail exit
point figure 2 that will prevent your tool from firing when not in contact with a work surface. To properly use
your LED guide light, press trigger before tool makes contact with your work surface. After making contact with
the work surface, release trigger, then press trigger again to fire a staple or nail. You will find this helpful when
firing staples or nails into tight corners and poorly lit areas.

MAINTENANCE

Your ET2025™ is virtually maintenance free. Keep tool clean and free of dust. Wipe clean with a dry cloth. Do
not use harsh chemicals to clean your ET2025™.
Your ET2025™ contains no user serviceable parts. In the unlikely event that your ET2025™ should need service contact:
Arrow Fastener Co., LLC
271 Mayhill Street, Saddle Brook, N.J. 07663 U.S.A.
Tel. 201 843-6900
Arrow ® accessories and genuine Arrow ® T20™, T25™ staples and
BN1810™ 5/8" brad nails are available at retail outlets, hardware
stores, lumberyards and wherever fine tools are sold.
FLAT CROWN
STAPLES
+ BRAD NAILS
Remove wire
attachment, and
turn power
adjustment knob to
drive staples &
nails flush into
surface.
figure 2
figure 1
BACK TO
INDEX
7