Intended Usage; Items Supplied; Description; Overview Of The Appliance - Silvercrest SKAK 1000 A1 Operating Instructions Manual

• Do not move the coffee machine during the
brewing process.
• Remove the jug first when the brewing process
is complete and the filter has fully drained itself.
Risk of stumbling!
• Lay the power cable in such a way that no one
can tread on or trip over it.
Warning regarding appliance
damage!
• NEVER operate this appliance when it is empty
(without water). If you do, the glass jug could
shatter.

Intended Usage

The coffee maker is intended exclusively for brewing
coffee. This coffee maker is intended exclusively for
use in private households. Pay heed to all of the
information in this operating manual, especially the
safety instructions. All other uses are deemed to be
improper and may result in property damage or
even in personal injury. We shall not accept liability
for damages caused due to improper use of the
appliance.

Items supplied

Coffee Maker
Glass jug
Measuring spoon
Operating instructions

Description

You can prepare hot filter coffee with the coffee
machine. The brewed coffee can be kept warm in
the jug by leaving it on the keep-warm plate with
the appliance switched on.

Overview of the appliance

1 Water tank lid
2 Water tank with water level indicator
3 Cable stowage compartment
4 Keep-warm plate
5 On/Off switch with integrated control lamp
6 Filter holder
Setting up and connecting to the
power supply
Risk of electrocution!
Under no circumstances should the appliance be
located close to water, especially to filled sinks and
other waterfilled vessels. Use the coffee machine
only on a thoroughly dry surface. The proximity of
water presents a danger, even when the appliance
is switched off.. After use, always remove the plug
from the power socket.
Risk of fire!
Never locate the coffee machine close to sources of
heat.
The appliance could be damaged.
Attention!
To avoid damage to the appliance and the location
area, use the coffee machine only on a flat and
heat-resistant surface.
- 3 -